Jump to content
SAU Community

Recommended Posts

WTB: stock RB25 turbs with elbow and water lines or aftermarket turbo to suit RB20, Cefiro/S13 coilovers, 4 stud rims prefer 17x8/9 or similar.

PM me if you have something i might be interested in.

Chad.

After water lines to suit RB20/25 turbo

Items:

Standard plastic R33 (non - GTR) Series I rear bar to suit 2 door

Extra Info:

Condition of mounting holes only important point. Rest is repairable. Colour not important.

Contact Details:

PM me or email at [email protected] (will try reply in 48hrs or less)

Price and price conditions:

Front bar cost $150 with damage , so shall start from there depending on condition.

WTB: 215/225 x40/35 R17'' tyres, skid tread only

need ASAP,

Ring Rob/Rocco at sinergy motorsports man, They have tons of tyres with just a tiny bit of shoulder wear that they will sell and or maybe give to you man.

WTB: 215/225 x40/35 R17'' tyres, skid tread only

need ASAP,

i got 2x mismatched 235/45/17 with 75% tread on em ill give ya for 25bux and 2x not sure wat brand but 235/45/17 50% tread on em for 25bux also if ya keen, or 40bux for the lot?

After water lines to suit RB20/25 turbo

Cefiro/S13 coilovers, 4 stud rims prefer 17x8/9 or similar. Also after heat shields for manifold and turbo RB20.

PM me if you have something i might be interested in.

Edited by DSTROY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...