Jump to content
SAU Community

Recommended Posts

anyone has r32 left rear seat belts?????

http://www.ebay.com.au/itm/NISSAN-R32-SKYLINE-FULL-SEATBELT-SET-IMACULATE-67-000K-/280720746690?pt=AU_Car_Parts_Accessories&hash=item415c42a8c2

don't have to wait for them to come from japan. I'm not sure what the rules and regs are in regard to seatbeat swapsies...

After a R33 gts-t (2 door if it makes a difference) series 2 bonnet in silver (KR4), in good condition.

I decided to wedge mine under the back of a tow truck tray. :(

Will pickup in Adelaide.

Please PM or SMS me on 0413 733 433 if anyone has one.

Cheers :thumbsup:

Lucas.

Edited by stolen-gtr

Been looking for ages and ages, need a rear R33 Series 2 Parcel Shelf with speaker grills and also the speaker holders that hold the speaker in the actual parcel shelf!!

my parts car has these, why not buy the whole thing for $700 :thumbsup:

After a R33 gts-t (2 door if it makes a difference) series 2 bonnet in silver (KR4), in good condition.

I decided to wedge mine under the back of a tow truck tray. :(

Will pickup in Adelaide.

Please PM or SMS me on 0413 733 433 if anyone has one.

Cheers :thumbsup:

Lucas.

I have one in great condition (Kr4 too) Lucas make an offer

my parts car has these, why not buy the whole thing for $700 :thumbsup:

I have one in great condition (Kr4 too) Lucas make an offer

Hi, just wondering if anyone has a front bar to fit R33 S1 coupe, my current one has a few cracks in it and might be easier to replace, i have a FMIC so the bar may need to be big enough for that, just chasing prices,

if possible in color GREY code KH2. preferably all ready to go rather then have to paint? factory bar or aftermarket? thanks

still looking for one... whistling.gif

After a R33 gts-t (2 door if it makes a difference) series 2 bonnet in silver (KR4), in good condition.

I decided to wedge mine under the back of a tow truck tray. :(

Will pickup in Adelaide.

Please PM or SMS me on 0413 733 433 if anyone has one.

Cheers :thumbsup:

Lucas.

need a r33 s1 indicator stalk with fog light switch on it asap, needed for my daily driver as its on its last legs and keeps arcing out

pm me asap

cheers aaron

Edited by buzz350

need a r33 s1 indicator stalk with fog light switch on it asap, needed for my daily driver as its on its last legs and keeps arcing out

pm me asap

cheers aaron

got one with out fog light switch if you need it to get out of s***

no one has a silver series 2 bonnet......? pinch.gif

After a R33 gts-t (2 door if it makes a difference) series 2 bonnet in silver (KR4), in good condition.

I decided to wedge mine under the back of a tow truck tray. :(

Will pickup in Adelaide.

Please PM or SMS me on 0413 733 433 if anyone has one.

Cheers :thumbsup:

Lucas.

need a r33 s1 indicator stalk with fog light switch on it asap, needed for my daily driver as its on its last legs and keeps arcing out

pm me asap

cheers aaron

got one but not sure if its got fog light switch ill check today

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...