Jump to content
SAU Community

Recommended Posts

anyone has r32 left rear seat belts?????

http://www.ebay.com.au/itm/NISSAN-R32-SKYLINE-FULL-SEATBELT-SET-IMACULATE-67-000K-/280720746690?pt=AU_Car_Parts_Accessories&hash=item415c42a8c2

don't have to wait for them to come from japan. I'm not sure what the rules and regs are in regard to seatbeat swapsies...

After a R33 gts-t (2 door if it makes a difference) series 2 bonnet in silver (KR4), in good condition.

I decided to wedge mine under the back of a tow truck tray. :(

Will pickup in Adelaide.

Please PM or SMS me on 0413 733 433 if anyone has one.

Cheers :thumbsup:

Lucas.

Edited by stolen-gtr

Been looking for ages and ages, need a rear R33 Series 2 Parcel Shelf with speaker grills and also the speaker holders that hold the speaker in the actual parcel shelf!!

my parts car has these, why not buy the whole thing for $700 :thumbsup:

After a R33 gts-t (2 door if it makes a difference) series 2 bonnet in silver (KR4), in good condition.

I decided to wedge mine under the back of a tow truck tray. :(

Will pickup in Adelaide.

Please PM or SMS me on 0413 733 433 if anyone has one.

Cheers :thumbsup:

Lucas.

I have one in great condition (Kr4 too) Lucas make an offer

my parts car has these, why not buy the whole thing for $700 :thumbsup:

I have one in great condition (Kr4 too) Lucas make an offer

Hi, just wondering if anyone has a front bar to fit R33 S1 coupe, my current one has a few cracks in it and might be easier to replace, i have a FMIC so the bar may need to be big enough for that, just chasing prices,

if possible in color GREY code KH2. preferably all ready to go rather then have to paint? factory bar or aftermarket? thanks

still looking for one... whistling.gif

After a R33 gts-t (2 door if it makes a difference) series 2 bonnet in silver (KR4), in good condition.

I decided to wedge mine under the back of a tow truck tray. :(

Will pickup in Adelaide.

Please PM or SMS me on 0413 733 433 if anyone has one.

Cheers :thumbsup:

Lucas.

need a r33 s1 indicator stalk with fog light switch on it asap, needed for my daily driver as its on its last legs and keeps arcing out

pm me asap

cheers aaron

Edited by buzz350

need a r33 s1 indicator stalk with fog light switch on it asap, needed for my daily driver as its on its last legs and keeps arcing out

pm me asap

cheers aaron

got one with out fog light switch if you need it to get out of s***

no one has a silver series 2 bonnet......? pinch.gif

After a R33 gts-t (2 door if it makes a difference) series 2 bonnet in silver (KR4), in good condition.

I decided to wedge mine under the back of a tow truck tray. :(

Will pickup in Adelaide.

Please PM or SMS me on 0413 733 433 if anyone has one.

Cheers :thumbsup:

Lucas.

need a r33 s1 indicator stalk with fog light switch on it asap, needed for my daily driver as its on its last legs and keeps arcing out

pm me asap

cheers aaron

got one but not sure if its got fog light switch ill check today

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...