Jump to content
SAU Community

Recommended Posts

guys i recently purchased a 1990 r32 gtst skyline, the guy i bought it off said it had a t3/t4r in it? and i dont know what that means? then he said he had the std turbo that was in it highflowed....are these 2 diofferent things?

i mean i just tuned the car on stock computer, and got 210kw atw on 18psi, but then cuts back down to 15psi.

boost starts to kick in at bout 3500rpm, but doesnt really go nuts till bout 5000pm.

so i really dont understand.....what is the go? LOL

any help would be appreciated, i mean its got a 14psi actuator fitted to it....IF THAT HELPS..but i think not

Link to comment
https://www.sau.com.au/forums/topic/143820-what-is-my-turbo-rb20/
Share on other sites

cool, well when i get a chance i will post it.

also, the car seems to be laggy between 0-3000rpm, is that normal? i have std computer so would that have anything to do with it?

Take a photo of it and post it here.

210rwkw is about 60rwkw more than a stocker will make. so it is not stock, it may be hiflowed or RB25hiflow. especially if it hits full boost at 5000rpm.

a tune will make a world of difference

given you have an aftermarket turbo a remap/tune is a good idea

should give you more average power everywhere.

also make sure it has the basics before you go any further

good tyres

good fuel pump (not stock)

good cold air intake

fuel reg might be a good idea

good heavy duty clutch

suitable fmic (not stocker)

i got installed already:

*600hp fuel pump

*fuel cutr defender

*fuel reg

i havent got a cold air intake setup, the afm and pod filter r just sitting there f@#Kn useless...but i just know what to do with it....can you guys send me sum photo's of cold air intake setups you have already? on an R32 gtst that is.

THANKS

oh and whats a fmic? no clue there

i got installed already:

*600hp fuel pump

*fuel cutr defender

*fuel reg

i havent got a cold air intake setup, the afm and pod filter r just sitting there f@#Kn useless...but i just know what to do with it....can you guys send me sum photo's of cold air intake setups you have already? on an R32 gtst that is.

THANKS

oh and whats a fmic? no clue there

FMIC is a front mount intercooler.

If you post up a pic im sure someone will be able to pick it for you straight away.

Cheers,

Ryan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...