Jump to content
SAU Community

Recommended Posts

I had my old 33 shooting HUGE flames when I had a 3inch pipe. That is right I didnt have and exhaust and a muffler, it was a 3inch pipe with a bit of sheetmetal welded around the back to look like a muffler, was awesome, from 2nd to 3rd or 3rd to 4th, just let of the trottle and take an extra second or two on the change and BAM! :(

vidsorban of stagea flamage!! :)

Dump pipe, front pipe, no cat, little hot dog muffler then canon Apexi rear muffler with removable silencer in place.

Still running the stock auto ecu but with an Apexi SAFCII that needs a tune to lean it out a bit more.

It pops and farts on engine braking as well. It feels so much more powerful with the manual.

I will have a go at getting some pics but it could be a bit tricky.

Yep Revzone did the work so they know hot to do it all now. I had a few issues with some late and missing parts from Nissan so it’s not finished yet, just at a level that is drivable. The hand brake isn’t mounted, no boot on the gear leaver so I have a hole in the floor etc.

Component Cost

Gear box 2nd hand $1,300

Fly Wheel $0

Hand Brake 2nd hand $0

Hand Brake bracket $47

Clutch New $320

Clutch Line New $120

Master Cylinder New $130

Clutch Pedal New $80

Clutch Pedal bracket New (Stagea) $112

Pedal box R33 to Cannibalise 2nd hand $280

Slave Cylinder New $95

Spigot Bearing $25

Bolts $100

Brake Fluid $50

Labour $900 est

Total So far $3,559

Left to do:

Gear Oil $60

Gear leaver Boot rubber and Plate $150

Bear boot leather $100

Gear Knob $50

Shift Leaver / Shift Forks $300

$660

Finished total $4,219

I will see if I can make it to the meet but wont be able to do the whole cruse.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...