Jump to content
SAU Community

Recommended Posts

Just planning and doing some research for a system for my R33, and deciding how to style the fibreglass boxes and panels which I intend to make for the boot install. As I'm going for a tidy and not so 'bling bling' look for my boot I'm thinking of using carpet or vynl to cover the fibreglass, rather than a painted finish which I have done in other cars.

I have noticed many others using matching automotive carpet and vynl, etc. but i'm just wondering if anyone knows the proccess of getting vynl and carpet to stick perfectly with the contours that are found on fibre glass installs. Im guessing a spray glue is involved? maybe a special type of vynl or carpet? Any ideas or links would be greatly appreciated, while i continue to look around.

Link to comment
https://www.sau.com.au/forums/topic/144514-upholstering-fibre-glass/
Share on other sites

  • 7 months later...

Your best bet is to use a contact adhesive.. you dont need special carpet or vinyl... just apply the adhesive with a brush so that you get a thin coating on both surfaces ... let it go touch dry... then carefully place the carpet or vinyl on to the surface... be careful of air bubbles if doing vinyl.

:D

Just planning and doing some research for a system for my R33, and deciding how to style the fibreglass boxes and panels which I intend to make for the boot install. As I'm going for a tidy and not so 'bling bling' look for my boot I'm thinking of using carpet or vynl to cover the fibreglass, rather than a painted finish which I have done in other cars.

I have noticed many others using matching automotive carpet and vynl, etc. but i'm just wondering if anyone knows the proccess of getting vynl and carpet to stick perfectly with the contours that are found on fibre glass installs. Im guessing a spray glue is involved? maybe a special type of vynl or carpet? Any ideas or links would be greatly appreciated, while i continue to look around.

if you fibreglassing the whole thing then your gonna have some left over resin. use that to stick down vinyl/carpet but be sure to apply a thickish layer and use the thinnest possible vinyl/carpet especially if you doing contours. if not and the area is flat then just make sure you got enough resin on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...