Jump to content
SAU Community

Recommended Posts

Hey all.

Etuned is holding a cruise meeting city west at 10:15pm~Depart 11pm, on the saturday the 9th.

This cruise is strictly for performance cars only.

Edited by Hoshima
Link to comment
https://www.sau.com.au/forums/topic/145028-etuned-open-cruise-9th-december/
Share on other sites

wat do u exactly mean by performance cars?

Cars with turbos + V8's

ORRRR?

Highly modified beast machines that get 10s

Without too much thought I would say that the "performance cars" means dont turn up if you just stole the keys to your mum's accent... even if you put a milo tin on the exhaust tip and sparyed the hub caps chrome.

... and before you ask... yes your GTR qualifies as a "performance car"

I'm Coming tonite.. Watch out 4 me wif my "Big Nissan Sticker" on the front of my Windscreen.

Hopefully i won't run into Any 500HP+/10 sec GTRRRRRR'z like a R32GTR wif Plate N# "D34THROW" :P

Hi there Hoshima hehe ;)

-SeSaR

Edited by Black_CSR

Thanks to everyone coming out.

My gearbox gone again, hehehehe.. I snap the third gear same as last time, anyway is cool. Is normal for performance car, something have to break :P I think is time for dogbox.....

Edited by Hoshima

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...