Jump to content
SAU Community

Recommended Posts

  • Replies 562
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hey Jetdat When does the money have to be paid by, Im am interested for my 32 sedan and my brother is interested for his 32 GTR, but we wanna know when we have to pay to have our money ready

Nick

im definitly intrested and will pay straight up, but i need to know if it comes in purple ...and if you can ever remove seat covers and also do you have to put holes in ur current seat to fit them

I think all those with questions such as colours and installation etc, please contact Utimate Directly

heres their details

Ultimate Auto Trim

PHONE: 0413404472 (OPTUS), 0433113911 (THREE)

[email protected]

Example - http://cgi.ebay.com.au/LEATHER-SEAT-R32-R3...1QQcmdZViewItem

I dont want to sound rude, but i want to get this on the road ASAP. I didnt pay for 2 seat cover sets and wait for other people to decide on what they want etc.

Either you want in and pay straight away without questioning or your not and pull out NOW. I believe i speak for those who have already paid for their seat covers

post-14539-1169301073.jpg

Edited by theevilworld

All those who are wanting to participate in the GB please post your orders as per below, and make the FULL payment into the account below. Keep receipt numbers and such in case they need to track your payments.

ACCOUNT INFORMATION:

ACCOUNT NAME: Yuni Halim

BSB: 063-134

ACCOUNT NUMBER: 10163846

In the reference include Username and Car type if there is enough space.

Your address NEED to be e-mailed to jetdat [at] hotmail.com so he can pass the address on to the company. Remember, give the address you want the item/s sent to!

-----------------------------------------------------------------------------------------------------------------------------

please fill out the following form:

User:

Car:

Front Seats:

Rear Seats:

Wrinkle Front:

Wrinkle Back:

Logo Embossing Front:

Logo Embossing Back:

Handbrake Boots:

Gear Stick Boots:

Door Trims:

Postage or Pickup:

OR

If you are going to buy the package then post:

PACKAGE DEAL!

User:

Car:

Front & Back Seats: , with Wrinkle Front & Back

Embossing Front & Back also including Door Trim, Centre Console, Handbrake Cover & Parcel Shelf and Gear Boot in

Postage: Yes/No (Area)

DO NOT WANT:

NOTE: If you take anything out of the package deal, price stays the same!

-----------------------------------------------------------

Prices:

Front Seats $300

Front & Back (If 20+ People) $400

Wrinkle Front Only TBC (To Be Confirmed)

Wrinkle Front & Back $50

Logo Embossing Front $30

Logo Embossing Front & Back $50

Handbrake Boots: $50

Gear Stick Boots: $50

Door Trims: $100

Door Trim, Gear Boot, Centre Concole, Handbrake Cover: $150

Parcel Shelf: $50

Postage: $30 Anywhere in Australia expect Perth, which is $50

OR

The Package which costs $600 pickup $630 Anywhere in Australia but Perth which is $650 and Includes:

Front & Back Seats

Wrinkle Front & Back

Embossing Front & Back

Door Trim, Centre Console, Handbrake Cover & Parcel Shelf and Gear Boot

Postage

The Package is a SAVING OF $220!!

Your order will take 4-6 weeks to arrive once your full payment has been made.

1 YEAR WARRANTY

ABN 93100593235 ULTIMATE AUTO TRIM

Ok then we have

1.The mafia

2. 40RSM

3. baldbeno

4. Ol Mate

5. Andru

6. Jetdat

7. theevilworld

8. theevilworld

9. ula32

10. fullo

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

Thats all i know of atm unless jetdat has paid for his other two then there is two more spots. Who else has paid?

damn:(

i just gave them a call and they cannot get purple material and even if i supply it they cannot do it. I will have another look at the colour charts and see what i can get, because now i have to get my dash re done too

Sorry guys.... I think I'm going to make myself unpopular..... but I might have to pull out.

:devil::devil::laugh::P

Hey guys, good news ... it looks like I might be back in ... :huh: Will know definetely soon. As soon as I know, I have the cash, I'll make my payment and put my order down again as it will change from my original one. after seeing the materials at ultimate auto trim.

Cheers,

Sam

Hey guys, I would like to participate in this group buy.

I have emailed jetdat but he doesn't seem to be replying to my messages. Do I just add myself onto the list?

just follow the above instructions and post what you want in this thread and then deposit the money into Ultimate's bank account

and then email Jetdat with your address

Edited by theevilworld

sorry guys my comp is playing up...i think i fixed the problem but not sure yet..

anyway i am going to call ultimate and get the payed list, then get a time frame for the covers..

all those that still want to join in GB please see the first post and pay..quicker we get 20 payed, quicker the covers arrive..

Im still in .. I can pay in 2 weeks for sure but most likly in a week or so .. Just confirm you have my order as im confirming im still in .. $400 sitting here just need $200 more

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...