Jump to content
SAU Community

Recommended Posts

I have a new clutch kit that i need to get rid of > i was going to use it but decided to sell the car.

It has never been used, its a full kit.

Includes pressure plate, and new clutch plate/ bearing.

the part number is 1SD104US

full faced heavy duty clutch made in japan

EXEDY MADE IN JAPAN.

$350

Turbo:

it is a 2535 GCG GARRETT turbo

it is t2 flanged but you can just use the t2 to t3 adaptor and make it fit your rb engine

it came off a s14 sr20

made 240kw at 16psi with barely any extra lag then the standard unit

was rebuilt by gcg 2000klms ago

internal wastegate

$1300ono

FMIC kit

it is a full kit, never touched. brand new.

comes with silicone,clamps,what not.

600x300x76mm cooler bar and plate

direct fit for r33 r32 and r34 skyline auto and manual. also fits stagea c34

thanks

$345.

Link to comment
https://www.sau.com.au/forums/topic/145616-fmic-kit-clutch-kit-2535-gcg-turbo/
Share on other sites

I have a new clutch kit that i need to get rid of > i was going to use it but decided to sell the car.

It has never been used, its a full kit.

Includes pressure plate, and new clutch plate/ bearing.

EXEDY MADE IN JAPAN.

PM ME

Thanks

$350

Where abouts are you located dude and do you know what the part # of the clutch kit is?

Cheers

George

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...