Jump to content
SAU Community

Japan Auto Direct

gtraaron
 Share

Recommended Posts

m3gtr Grand Master

m3gtr

Posted
Posted
The cars the guys at J-Spec list from JAD are always background checked from past auctions, dealerships etc... basically they try and get as much information about the cars from an independent source... usually helps negotiate a better deal from the supplier. So you'll find that not all of their cars are mirrored on the site, only the ones that pass the scrutiny :)

There's also a good repor with the staff at JAD as they've negotiated on a fair few cars through them, instead of one off purchases if you dealt direct with them... this means there's no confusion on the quality of cars that JAD are expected to supply, coz if things go pear shaped with one car for a client, then they'd be increasingly reluctant to use JAD's services for future clients.

towing the company line monkey?

raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted
a business opportunist if ever ive seen one.

quicker reaction than Victor Bray at the staging lights...

towing the company line monkey?

Nice work there, responding to six month and three month old posts.

dftreaper Apprentice

dftreaper

Posted
Posted
Has any one used japanautodirect.com for importing a car before and if so how did you find them ?? They have an ad in hpi but i havent heard of them !! good or bad !! :)

Hi I haven't of them but i used japanese used car auctions

and found them and their web site good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • PranK
      2001 R34DE

      By PranK · Posted

      Bloody apprentices! 🙄
×
×
  • Create New...