Jump to content
SAU Community

Recommended Posts

Due to popular demand, i have posted my personal drift settings for the game gran torismo 3.

ENJOY!!!!!!!!!!!!!!!!

This Setup works better on the following cars:

S13/S14/S15/180sx/R32GTST/ALTEZZA/FX7FC/TURENO

For other cars with different weight displacement, modifications need to be made to these settings.

Car Modifications:

- Full Racing Suspension

- Sports Brakes & Balance Controller

- Stage 3 Turbo

- Racing Intercooler

- Racing Muffler

- Sports Chip

- Port and Polish

- Full Engine Balance

- Full Racing Transmission

- Triple Clutch

- Racing Flywheel

- Carbon Driveshaft

- LSD Full Customize

- Weight Reduction Stage 3

Basically you need the best stage of all these modifications

"IMPORTANT"

Tires play a big part in this, you NEED simulations on the back and the best racing tires on the front.

Dont forget to set - ASM and TCS set to zero. That is, anti sway, and traction controol.

Settings:

SR - minimum /minimum

RH - minimum/minimum

Bound - 6 / 7

Rebound - 6 / 7

Camber - 6.0 / 1.0

Toe - -1.5 / 0.5

Stabs - 2 / 4

Brakes - Rear:9 / Front: 24

LSD: Initial = 20, Accel = 50, Decel = 20

With the Gear ratios, on stage 3 turbo, try and drop it down by about 3to 4. say your on 30, get it down to 27ish.

Link to comment
https://www.sau.com.au/forums/topic/14625-gt3-drift-settings-here/
Share on other sites

Altezza = RWD

FX7FC.. do you mean RX-7 FC? yes.

3. can we use a stage 4 turbo instead of a stage 3.. like on the S15, dont do that, way too much lag, and you need to lower the gear ratios, and with lotsa lag, compensated with gear ratios...it frys the tires WAY to easly, and its not as fun or realistic or easy.

4. are FD RX-7's any good?....yes.

  • 4 months later...

yeah the same with me. i set them with my standards then tune them after that... what settings do you use as your "Trial Tune"? the way i set mine is, Tires Super Soft in the front and Med in the rear, I get the best in ALL the mods. I tune the suspention slammed... then the bound and rebound one step down on the front, camber 0 front 3 rear, tranny i make the gearing to the middle for the max of both worlds :P , then i just play around with thows settings... after i do a trial run.

Originally posted by predator666

Does it feel like drifting in the game though? Or just a half-ass comparison

apparently GT4's engine should be able to much more accurate emulate drifto..

yeah it does it feels just like my car when i go sideways... its even more fun when you use a steering wheel with GT3 but GT4 WILL be better... i can wait
  • 3 weeks later...

I like using the 22B Subaru for drift.

Sounds crazy I know, but it is the best car I've used so far.

You need to have it fully modified with the best of everything, then you have to set the torque split to 10/90 and the ASM and TCS to 0. Also you have to use simulation tyres.

you mean you like to drift in free run mode?

or you use the A/B/C class cars in free run without mods?

unmodded car drifting?

predator666:, i gather you know what real drifting feels like....and yeh you get most of the feeling, apart from the inertia feelings you get in a real car...

i wish there was a GT3 meet or LAN style meet for this, cus id love to drift with the best in a 6 player shoot out.

perhaps we can all go get GOLIVE or whatever it is and play online with eachother heheh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...