Jump to content
SAU Community

Recommended Posts

Hey guys, I've recently been experiencing my Hicas light on the dash flash on and off on occasion, like many others have experienced. My steering is now crazy stiff as if there's no power assist, but the fluid is full.

This happened over the period of about a week, starting with just the light, and progressing to the tight steering.

I've searched Hicas and a lot of you have been experienced different problems and have suggested the hicas lock bar. Does this bar fix all problems relating to the HICAS? Anyone had this particular problem, replaced the bar and fixed it?

Could the HICAS light suggest other problems, such as the vehicle speed sensor? I'm thinking this could be the culprit, but without the means to check the OBD codes, I can't be sure. Is there any other way?

Cheers.

Richo

PS. Sorry, I just realised I may have posted this in the wrong section.

Edited by siiick
Link to comment
https://www.sau.com.au/forums/topic/146277-hicas-and-steering/
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

When this happened on mine I found it was an electrical problem, I fixed it by unclipping all the plugs and spraying them with Lanox, I couldnt figure out which one it was but it fixed it, when I say all the plugs I mean every one from front to back.

When this happened on mine I found it was an electrical problem, I fixed it by unclipping all the plugs and spraying them with Lanox, I couldnt figure out which one it was but it fixed it, when I say all the plugs I mean every one from front to back.

yep follow his directions, mine was electrical related also, note if u leave ur battery terminals off for a period of time, it will come good, after system reset. It was suggested to me, this is hicas diagnostic mode. there may have been some dirty on the connections, as we pulled all the plugs off, blew them out, and havnt had the issue return.

cheers,

  • 10 months later...

Update ** the problem is back for me.. 'siick' did you end up fixing the problem.??

Something else I noticed this time around is..

When the hicas light comes on, and the steering becomes stiff (ie. no power steering), the ACC control doesnt work. I notice No blip when moving the steering. I have checked all fuses this time, and all is ok. I will take off all plugs again, and clean up, see how it goes.

It is said the heavy steering is a "low assistance mode"

which happens when there's a HICAS ECU error code.

I found a HICAS diagnostic test that you can do manually -

http://www.overflow.250x.com/diagnostics.htm

Another way is to go to your local Nissan dealer

and check via Consult (diagnostic computer).

Consult should be able to access the HICAS

ECU error codes.

Also other causes of HICAS problems can be weak

voltage because of a faulty alternator or low

fluid level in the powersteering resouvoir (R32).

Sometimes the HICAS ECU (like a faulty AFM) can have

bad solders. It's not worth fixing and I recommend a

second hand replacement HICAS ECU.

But be aware that GTS, GTS-T, GTR HICAS ECU's are

supposedly not the same (part numbers are different).

Make sure you have the correct replacement HICAS

ECU.

Edited by SKYPER

thank you that is some really good info there.

"The HICAS light in the instrument cluster will be flashing quickly (for normal) or will flash a code indicating any problems. Long flash = first digit, short flash = second digit. Diagnostics will return to normal after five minutes, or any speed over 10k/ph, or ingnition is turned off. "

But will this work with a non standard ecu.. for instance a PowerFC

Have you been able to get into this Diagnostic mode yourself 'Jdfng' ? I have not , even back with my stock ecu, and now with the PFC. I have tried Extensively tonight, to get it into diagnostic mode, following the instructions on that website exactly. And also tried a few variations of the instructions aswell.

as prior to this last time I had issues with the stock ECU, I did try a few times, with very similar instructions to that website, that didnt work either.

In the end I gave up, the problem just kept returning no matter what I did, the plug spraying always cured it but only in the sort term, I looked at the options available and settled for the Tomei hicas lock kit, mainly because it is fairly simple with the hicas unit staying there but locked with spacers and a elec unit to fool the main ecu into thinking all is good with it, the other option is a lock bar which replaces the hicas unit.

I never got the diag to work either.

About the link, you're welcome. :)

That manual HICAS diagnostic mode does work on a R32

and it worked first time. Only problem was getting it into

full diagnostic mode as HICAS ECU threw a tantrim.

Basically the rear wheels felt like they were turning side to side

and light flashed on the dash (R32 had a faulty ECU at that time).

Driving backwards or forwards at less than 10kmh didn't do anything.

I think you might need to turn the steering wheel between

turning on ignition and the revs rising on the dash. I guess

probably by the time revs have risen and settled at idle,

a couple of seconds has passed.

As far as I know the only difference is R33 has a separate

HICAS system in the boot (not feed by powersteering

resouvoir in engine bay).

The R33 powersteering resouvoir is sometimes used

when eliminating HICAS on R32.

Edited by SKYPER
As far as I know the only difference is R33 has a separate

HICAS system in the boot (not feed by powersteering

resouvoir in engine bay).

This is Correct. which makes that tutorial quite useless for anything other than R32.

The issue has seemed to have dissapeared this morning :)

Theres gotta be someone out there, who knows how do diagnose Hicas R33 onwards. Im not keen on using a lock bar. As I plan on using the Hicas to its full potential, And solving this issue! :rofl:

Have you been able to get into this Diagnostic mode yourself 'Jdfng' ? I have not , even back with my stock ecu, and now with the PFC. I have tried Extensively tonight, to get it into diagnostic mode, following the instructions on that website exactly. And also tried a few variations of the instructions aswell.

as prior to this last time I had issues with the stock ECU, I did try a few times, with very similar instructions to that website, that didnt work either.

yeah mate i have had in diagnostic mode a few times... Having said that, the last time I tried it, it flashed up the codes but didn't do it's wheel moving thing...... But it still flashed up the error codes.....

i might try re-setting the ECU and go from there... I tried it on my mates R33 the other day and it flashed the error codes... still no bum wiggling though...... not really sure why........

semd me your number by PM mate and I'll give you a call and talk you through it if you like :rofl:

would come over and show you but it's a bit too far to come :)

R32 had a faulty HICAS ECU at that time, so I guess that's why the rearend

wiggled.

Replaced ECU, no more heavy problems.

Do you guys have an aftermarket boss kit for aftermarket steering

wheel (could be interfering with HICAS steering angle sensor that's

located behind steering wheel)????

Edited by SKYPER

Still, get the steering angle sensor checked out.

I guess another way would be to find the same type of car and swap over HICAS ECU's.

Then see if the problem appears on the other car. I gather it would eliminate HICAS ECU

as the problem.

Also check the HICAS ECU plug as sometimes the plastic plugs can get bent (had this

problem with engine ECU plug).

Edited by SKYPER

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...