Jump to content
SAU Community

Mixing Injectors, New And Old

Birnie

By Birnie,
in General Automotive Discussion

 Share

Recommended Posts

Birnie Veteran

Birnie

Posted
Posted

Hey peeps,

Looks like i've landed some brand new S15 injectors (480cc) and now I'm looking for 2 more to go with em for the RB.

Does it matter much if i scam a second hand set and throw them in the mix?

As long as they all flow the 480 I'd be ok right?

Just checking in with the experts before things go bang !

(PS, if anyone wants to go halves in a set of 4 so they can make their own mix of 6, let me know)

Thanks.

Birnie

Link to comment
https://www.sau.com.au/forums/topic/146341-mixing-injectors-new-and-old/
Share on other sites
SKY031 Grand Master

SKY031

Posted
Posted

Have you considered buying another set of 4 so you can have 2 spares as replacements to tinker/play swapsies with in the future?

You'd have test parts on hand if you think you've got an injector problem, (cracked, blocked, leaking etc) and if you wanted to replace the entire set, you'd only have to buy another set of 4, because you'd already have 2. :glare:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Curlyfred
      Rb26 iron block limit

      By Curlyfred 路 Posted

      You can probably break everything and any point that's true. But with the "precautions" of building the entire engine and everything around it and with a solid tune I wouldn't expect that to happen right of the bat. 馃槢 
    • r32-25t
      Rb26 iron block limit

      By r32-25t 路 Posted

      You don鈥檛 need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I鈥檝e seen them break under 400kw
    • Dose Pipe Sutututu
      Question about BoV on RB25DET NEO

      By Dose Pipe Sutututu 路 Posted

      A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Predator1
      Rb26 iron block limit

      By Predator1 路 Posted

      Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • Roy
      Rb25/30 Rb30det Vvt Internal Oil Control

      By Roy 路 Posted

      So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
脳
脳
  • Create New...