Jump to content
SAU Community

Recommended Posts

need to get a proper camera

Agree with everyone about the bar and bonnet, very nice indeed.

Can anyone positively ID that bumper?

I'm having a LOT of trouble finding a bumper that I like 100% and is available somewhere in Oz...

Too bad I have no fiberglassing skills so I could make/mod my own 'ideal' bumper :D

Got my twin dump pipe from these guys... The said that there twin tips have same flow as there cannon and look at there power figures...

Good quality and price give them a look http://www.cesracing.com.au/products/

Nice. So thats a 3" system yeah? Looks like they don't make 'em for 3.5"?

Agree with everyone about the bar and bonnet, very nice indeed.

Can anyone positively ID that bumper?

I'm having a LOT of trouble finding a bumper that I like 100% and is available somewhere in Oz...

Too bad I have no fiberglassing skills so I could make/mod my own 'ideal' bumper :D

both my front bar and bonnet are East Bear products

http://www.powerplayimports.com/index.php?...t&cat_id=52

they have 2 types of gtr look-a-like front bars and 2 types of lower lip attachments

read through that page and you'll get the idea :D

Edited by R-SPEC
nice car r-spec, so u settled for a r34.

like ur signature too lol :D

thanks man was jus lookin at pics of your 33 very nice and neat :D

and yes death to SR's !

missusR34GT - take off that ironing board and dump the shit out of your car! will look 6 million times better

thanks man was jus lookin at pics of your 33 very nice and neat :thumbsup:

and yes death to SR's !

missusR34GT - take off that ironing board and dump the shit out of your car! will look 6 million times better

Really? Is it that bad? Wait what shit out of my car.. the babyseat?

ahahahaha

dump it = lower it :thumbsup:

nah it looks good but just sayin it'd look better sitting lower and wingless. as all 4 doors should be!

Omg.. feel like such a dud..

I would ... not sure if I'm ready to get rid of the wing.. and I may lower it.. I will sit and ponder..

btw nice car.. I like the paint job.. I'm looking to get mine resprayed burple..

Cheers for the advice!

HI I'm Anna...

This is my R34GT .. not as fab as the others but I still love her!

post-48691-1205220883_thumb.jpg post-48691-1205220909_thumb.jpg

btw why do people hate wings so much?

Is your car non turbo and was advertised on ebay like 2-3 months ago?

BTW: love the wing think its either a uras original or a knock off my only suggestion would be to get lower mounting brackets so it sits lower on the boot then won't look so outta place. If you added the wing where'd you get it from and price please :thumbsup:

alloo,

Had it for just over a year now.. but it was bought on ebay, wing and all.. so i'm not sure where he got the wing from.

It's NA tiptronic.

Thanks for your thoughts.. I agree about the wing, I think it gives it some character... I know some people hate it but each to their own!

Edited by missusR34GT
Wait what shit out of my car.. the babyseat?

LOL,... what a classic. :action-smiley-069:

You should definately change to slimline plates too, it can make such a big difference to the overall look of your car.

I used to have the yellow NSW plates on a black car a few years ago, and that looked absolutely hideous.

both my front bar and bonnet are East Bear products

http://www.powerplayimports.com/index.php?...t&cat_id=52

they have 2 types of gtr look-a-like front bars and 2 types of lower lip attachments

read through that page and you'll get the idea :action-smiley-069:

Ah, East Bear strikes again... all the bumpers I like seem to be from them.

Naturally they are bloody expensive...

Thanks for the info!

LOL,... what a classic. :P

You should definately change to slimline plates too, it can make such a big difference to the overall look of your car.

I used to have the yellow NSW plates on a black car a few years ago, and that looked absolutely hideous.

Hahaha yes I know I know... my fiance's blokey as so you'd think I'd have picked it up...

Yeh looking to change the number plates too.. just haven't got around to it.. 3 kids under the age of 5.. it ain't easy. But first thing's first - I want to respray the car then I'll look at changing the plates.. it'll be a while :blink:

You see for me it's like bunk bed and clothes for the kids or respray the car and other mods for me... I'm a mother first car enthusiast second.. *sigh*

That's the way all good mother's are, maternal instinct kicks in and children come first.

However, you could always consider the fact you have "4" kids,...... including the skyline, which just needs a little more love and attention than the others... lol. :blink:

Just explain to the kids that their "big brother" needs new clothes (paintjob) first, and that they will just have to be naked for the next few months, and in terms of the bunkbed, they can just sleep on "big brother's" lap (aka the backseat).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...