Jump to content
SAU Community

Recommended Posts

7135112315_5c912b9da1_b.jpg

Now what's the procedure > which buttons do I need to push to convert the above 2D picture into 3D physical form 3.5mX1.8m ???

There must be a way !!!

Oh wait...

Let me take this keyboard down to the garage first...

...and the rest...

Marko, the size is 18x10.5 +15

Terry-236.jpg

Terry-149.jpg

I believe that they come out of the factory with normal GT-R (BBS) rims, although the original owner immediately optioned up to BBS LM whilst new.

My log book also says (& I'm proud of that owner for this), that all services were done with Nissan Japan (which doesn't take kindly to their cars being serviced elsewhere I've been told).

I consider myself fortunate.

Many thanks as usual Michael & my Victorian friend- appreciated.

Terry-237.jpg

Terry-238.jpg

Since the philosophy of the N1 was to keep the car light, I've done a few things to lighten up the car even more with titanium goodies.

Considering a C/F prop shaft soon > still won't be as light as your bike tho'

I remember in the 70s how there was massive competition between the Kawa & Yammy > I used to play golf with the Sales Mngr of Yamaha Aust > he asked me if I wanted one hehe...

Looks great Terry.

I should have picked up that Titanium strut brace in the for sale section.

Anyone in Brisbane have a Nismo air intake?

I want to see if it will fit over my radiator and have enough clearance for the bonne to close :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...