Jump to content
SAU Community

Recommended Posts

as of yesterday my 32 sounds like a wrx and puffs out large clouds of smoke and shudders heaps bad so i guess my new years plan is rebuild... yay...

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

$orry to hear _ can you post the failure when known pls. Merry Xmas huh!

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

I have a fairly big list.

fit the parts already on order...

splitfires, injectors AGAIN!!! and 4 pot calipers with 396mm rotors

fine out the tune not expecting anything more than 230rwkw

New parts for the new year.

1 mechanical 1.5 way LSD

2 clutch capable of holding 250rwkw with ease

3 replace gearbox at the same time

4 decent rear rims/tyres that can put down some power with out slippage

5 put an akubra on the back parcell shelf

6 buy an XR6 turbo.. jks :laugh:...

And I'm not selling unlike some of you other wishy washy types........lol, I'll enjoy the import scene while its going, even if it is in its twilight years.

Like Dan',I aint selling my pride and joy,twilight years of the import boom or not! I'm approaching my twilight years according to some young whippersnappers out there,but,for me anyway,GT-R ownership is forever. Sorta like a tattoo,really;think long and hard before committing,as you should have it forever. And it costs money. And it can hurt. And it can have you mislabelled. Wow;never thought there were so many similarities...

So,in short:roll on the rebuild!

Tidy up the body & get rid of the two tone, Final Konexion kit, carbon bonnet, new suspension & a few small power mods (fmic, boost, better zorst, safc etc).

But before any of that - Find a new job that pays a decent amount of money so I can afford to start modding -_-

Probably won't happen, but I can dream :)

JR BN body kit, high flow 33 turb, gtr injectors, pfc if i can find one for the rb20, race seats, half cage and harneses, and install my defi guages. also get it all tunes and installed wich will take the longest ohhum

Cant say I've noticed that the import years are in their twilight..... or am I just blind? :P

tbh, i haven't noticed a sportier sedan car that handles as well and happens to be in the 18-25k bracket and look current.

How can this import years thing be over?

Or is everyone buying some peugeot diesel or toyota prius because the environment is getting all emo?

tbh, i haven't noticed a sportier sedan car that handles as well and happens to be in the 18-25k bracket and look current.

How can this import years thing be over?

Or is everyone buying some peugeot diesel or toyota prius because the environment is getting all emo?

"Getting all emo' "...LMAO! Those f**king black-hair-dyed little turds are affecting everything,yeah? Ah,go slit your wrists,emo kids...Sorry;rant over.

Well,it does seem import ownership seems 'lees cool' in some young'un's eyes,and we're always hearing that our desired cars are all 'getting long in the tooth' now most are past the 15 year rule. However,show me a Commonwhore or a Falchoon that is the bang-for-your-bucks that any import offers. Nup;can't be done. So Bluprint isn't going blind...maybe just me in my old age,cateracts and all that,LOL!

JR BN body kit, high flow 33 turb, gtr injectors, pfc if i can find one for the rb20, race seats, half cage and harneses, and install my defi guages. also get it all tunes and installed wich will take the longest ohhum

May be able to help you re: GT-R injectors! PM me if you're interested...

ive got massive plans which have started to take place..

gt2860r-5

pfc

044

600cc squirters

titanium catback

s/s front/dumps

mines pods

hks cam gears

cooler

hardpipe kit hks

oil cooler +relocator

os twin plate clutch

hks coilovers

pads etc

all this is purchased just waiting now

hoping for nice 300awkw not much more as i want this motor to last for bit longer yet...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...