Jump to content
SAU Community

My Dr

Ravenoak

By Ravenoak,
in Classic & Vintage (1950's-1980's)

 Share

Recommended Posts

Ravenoak Community Regular

Ravenoak

Posted
  • Author
Posted
Doesn't take much, just lots of bits not available anymore or know where to get them.

Cheers, D

It is certainly hard to find a good one. Mine is not perfect (still sorting out some of the interior stuff) but bodywise and mechanically it is superb for a 23 year old car. Whilst it is never going to embarrass a newer Skyline it is certainly fun to drive and brings a smile to my face everytime... :(

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2789665
Share on other sites
Ravenoak Community Regular

Ravenoak

Posted
  • Author
Posted
You should try hit up Ben at HPI and and convince him he needs more suitable Watanabe's for his project... I have a HPI here with a pic of your car sitting in the auction yard with the Wata's still on and it looks beautiful. Offset is perfect

Yeah some Watanabes would be superb. I have Ben's email address, I might see if he wants to sell them.

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2802228
Share on other sites
Ghostrider Grand Master

Ghostrider

Posted
Posted
Yeah some Watanabes would be superb. I have Ben's email address, I might see if he wants to sell them.

What's with "Watanabes" they're like arseholes, everybody has them, what happened to some individuality?

Anyone would think they are the ONLY wheel made for Skylines.

Cheers, D

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2802327
Share on other sites
Ravenoak Community Regular

Ravenoak

Posted
  • Author
Posted
What's with "Watanabes" they're like arseholes, everybody has them, what happened to some individuality?

Anyone would think they are the ONLY wheel made for Skylines.

Cheers, D

Depends if the wheel centres for the GTP's ever arrive....it looks terrible with those holes in the centre.

Come to think of it I might get some centres machined up if they dont arrive.

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2802647
Share on other sites
discopotato03 Grand Master

discopotato03

Posted
Posted

I think the wheels on it suit it , I wouldnt bother with the Japanese Mini Lites or "Watties" if you prefer . Those Rays wheels are spot on offset wise and have lots of clearance on the standard brake calipers . Functionality wise I'd say they'd be hard to beat on a car like an R30 with its zero scrub offset strut/hub geometry . Those wheels are a "Reverse Rim" which you will find out about if you remove the tyres .

So fuctional good looking and not too many around .

Cheers A .

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2802964
Share on other sites
Ghostrider Grand Master

Ghostrider

Posted
Posted
Depends if the wheel centres for the GTP's ever arrive....it looks terrible with those holes in the centre.

Come to think of it I might get some centres machined up if they dont arrive.

Have you ever stopped to consider ............. at track days and WSID etc, those holes in the centre are maditory. Wheel covers, centres etc are not allowed, the nuts have to be visible, as I found out after I went to the trouble of getting centres spun for my BBS Lorinser wheels (see splumph thread)

Cheers, D

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2803496
Share on other sites
Ravenoak Community Regular

Ravenoak

Posted
  • Author
Posted

All good points there guys.

Looks like I have been convinced to stay with the GTP's...

As for the wheel centres, I will not be tracking this car. I have access to an EVO 9 for that purpose so ultimately the track regs are not really an issue.

Speaking of wheel centres, they arrived yesterday. The centre fit the front perfectly and look great but I will need to get a couple of mm machined off two centres for the rear.

Adrian, while you are here, check your PM about the lock nuts.

cheers

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2805132
Share on other sites
  • 4 weeks later...
D-limo Veteran

D-limo

Posted
Posted

I'm not saying the GTP's don't look good, they do.... Just the Watanabe's look fantastic. Yes watanabe's have become a bit of a fanboy type wheel to have. But on a DR30 they are at home.. These are 16's with a perfect offset and the color of the wheels suits the silver very well.

Pics really tell a thousand words.. If I could scan it for you I would

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2880884
Share on other sites
Ghostrider Grand Master

Ghostrider

Posted
Posted
I'm not saying the GTP's don't look good, they do.... Just the Watanabe's look fantastic. Yes watanabe's have become a bit of a fanboy type wheel to have. But on a DR30 they are at home.. These are 16's with a perfect offset and the color of the wheels suits the silver very well.

Pics really tell a thousand words.. If I could scan it for you I would

Watanabes ............................. bullsh!t they is like arseholes, everybody has one AND they aren't an original design, just like everything the japs do, they are copies of the original ENGLISH MINILITE wheel.

Cheers, D

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2880913
Share on other sites
0R10N Explorer

0R10N

Posted
Posted

GT-Ps are nice! I was looking at buying a set for my coupe back in the day, but they aren't cheap. My other choice was the Volk GT-U (mesh type) but they aren't available in 4x114.3.

All this trash talk about Watanabes is making me a bit iffy about buying a set of F8s from Japan, but I guess they're 100x more popular in Oz than here in NZ :P The last time I saw a set of 'em on any car would have been a good 18 months ago, and they were on some random 1980s Civic (go figure)...

Just out of interest what offset and width are you folks running on your R30s? The whole reason I'm getting the Watanabes shipped over is because the Work Ewing rims on my sedan seem to have the completely wrong values on the rear (15x8.0+24), and as a result they stick out from the guards by at least 20mm. Also, finding decent tyres to fit 15x8 rims proved to be the ultimate headache - I ended up stretching some 215s on, which was borderline when it came to warrant of fitness time.

Typical that I couldn't find any SSR reverse mesh rims when I was looking - now that the F8s are on their way, a whole slew of 15" SSRs have suddenly appeared on Yahoo Auctions Japan at bargain prices :blink:

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2881659
Share on other sites
Ghostrider Grand Master

Ghostrider

Posted
Posted
GT-Ps are nice! I was looking at buying a set for my coupe back in the day, but they aren't cheap. My other choice was the Volk GT-U (mesh type) but they aren't available in 4x114.3.

All this trash talk about Watanabes is making me a bit iffy about buying a set of F8s from Japan, but I guess they're 100x more popular in Oz than here in NZ :P The last time I saw a set of 'em on any car would have been a good 18 months ago, and they were on some random 1980s Civic (go figure)...

Just out of interest what offset and width are you folks running on your R30s? The whole reason I'm getting the Watanabes shipped over is because the Work Ewing rims on my sedan seem to have the completely wrong values on the rear (15x8.0+24), and as a result they stick out from the guards by at least 20mm. Also, finding decent tyres to fit 15x8 rims proved to be the ultimate headache - I ended up stretching some 215s on, which was borderline when it came to warrant of fitness time.

Typical that I couldn't find any SSR reverse mesh rims when I was looking - now that the F8s are on their way, a whole slew of 15" SSRs have suddenly appeared on Yahoo Auctions Japan at bargain prices :blink:

The pics below show 16 x 8's x +38 offset on the back of my HR30 coupe with a complete DR rear end. Wheels are shod with 225/50 x 16 Bridgestone G Grids.

Cheers, D

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2881753
Share on other sites
0R10N Explorer

0R10N

Posted
Posted

o_O

I wonder what's gone wrong then... perhaps I'll pull the rims off and measure the offsets again, but I'm positive the calculation ended up being +24. Hope there's nothing funky going on with my rear suspension setup >_<

Link to comment
https://www.sau.com.au/forums/topic/148828-my-dr/#findComment-2887016
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...