Jump to content
SAU Community

Recommended Posts

thought i'd start this seeing the CAI thread that is sticky is more about partitioning a pod than about stock airboxes.

I have sepnt hours trying to find where the piping going into the stock airbox comes from. I decided that it opens up to under the headlight where there is minimal airflow.

i tried to take the headlight out to see more but failed miserably :) -> 2 hours of taking out rediculous bolts and then pulling the bloody thing till it didn't come off and i didn't want to break it! Then i tried to cut a hole into the pipe going into the airbox but couldn't get one bigenough to do anything so i gave up again (there's a trend here about giving up i know).

has anyone tried anything with the stock airbox still on (r32 here), like maybe removing the pipe going into the airbox (how?) so that there is just a hole directly from under the headlight into the airbox.

i need fresh air!

Waz...

Link to comment
https://www.sau.com.au/forums/topic/14912-cai-to-stock-box/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...