Jump to content
SAU Community

Recommended Posts

Hi all

i have an aftermarket HID for my R34, but it's made the parkers look like yellow pieces of poo. Just wondering if anyone has LED bulbs for parkers? Knows of anyone that sells LED bulbs for parkers?

i'm not exactly sure what type of bulb my parkers would take anyway...

cheers,

daniel

Link to comment
https://www.sau.com.au/forums/topic/149285-led-bulbs-for-parkers/
Share on other sites

Got mine from Autobarn...jst ask for parker bulbs and ask for the white light ones...the bulbs are normally blue but emit a whitish light..cost $10 for the 2. They are a wedge type bulb. easy as to replace too. You could remove ur existing one and just take it in to them to make sure u have the correct ones.

+ PARKER (WEDGE) - SMALL LIGHTS IN FRONT

++ POLARG M4 (BRIGHT) - $20 A PAIR

++ POLARG L01 (BRIGTHER)* - $25 A PAIR

++ POLARG J51 LED (BRIGHTEST)* - $49 A PAIR

I believe all 3 are the same fit, just different brightness.

Go buy a set and tell us how bright is brightest :cool:

I just installed HID for my R32 and the parkers looks like candel lights.

I then bought the following, now they almost have the same colour.

The LED are T10 which I assume is the same in R34.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...p;rd=1&rd=1

How difficult are they to install? Do you have to drop the front bar?

nope piece of cake! parkers are located at the corner, if your hands are small enough, just stick ur hands in there...twist, pull out the whole socket, replace bulb, stick it back in, twist to lock and bobs ur uncle! I replaced both of mine in like less than 5 mins.

yeah, it's quite easy, just a little tight and fiddly. I noticed too that if either don't have everything connected up, or you don't have your front indicators connected up, you indicate at a quicker pace :P so if one day you car indicates very quickly (in terms of temp) something might not be connected

anywho... what's the specs i'm looking at?

12 V, 50 W? Wedge type, is that what a parker is? I'm not going to buy a $49 pair if there are like $10 on ebay. I'm happy to be guinea pig... just not sure what the "details" for our parkers are...

The LED are T10 which I assume is the same in R34.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...p;rd=1&rd=1

can anyone confirm if these will fit an R34? if they do, i'm happy to give them a go for the price! cheap as chips!

  • 1 month later...

I had something like the following on me old R34

http://cgi.ebay.com.au/2pcs-T10-194-Wide-A...1QQcmdZViewItem

Except the one I got was from US and it was 16led ones. Dont get any that even have a small amount of blue, as the lense inside the parker casing sorta amplifies the blue color and you will get a nice little defect (speaking from experience). I would go with ones that have more led than one or two as they will put out more light and would fit much better with HIDs in terms of color (unless its the lex led ones).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...