Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • 7 months later...

Left Hand Side Passenger Side Door- Selling With Regulator -(No Door Trims They Have Been Sold) $350

Right Hand Side Drivers Side Door- Selling With Regulator -(No Door Trims They Have Been Sold) $350

Left Hand Side Passenger Side Mirror- Black In Colour $100

Right Hand Side Passenger Side Mirror- Black In Colour $100

Rear Gts Wing- Black In Colour $150

Front Drivers and Passenger Seats in Very Good Condition Both $300

R33 - Gts Series 2 Manual Computer $225

R33 - Gts Front Dash $100

R33 - Gts Tail-lights $150 EACH.

R33 - Gts Centre Console Clove Box $80

R33 - Gts Front Plastic On Dash With Hazards, Clock and Vents (Will Not Separate) $70

R33 - Gts Complete Rear Suspension Inlcuding Cradle, Diff, ABS, Disk Brakes Calipers, Lower

Control Arms, Shocks, (selling Complete Will Not Separate). $1500

Pictures Took Long To Load On Here Anyone Interested Send Me Ur Email Address And I Can Send You The Pics, All Parts Are In Very Good Condition, You Can Contact Bill On 0424-313-168 I am Located In Sydney Will Not Post Pick Up Only.

Edited by DR_GTR

Sometimes means Cash On Demand... but... dunno.

"R33 - Gts Front Plastic On Dash With Hazards, Clock and Vents (Will Not Separate) $70"

Where in Sydney are ya? Please PM me or email me with photos? [email protected]

Left Hand Side Passenger Side Door- Selling With Regulator -(No Door Trims They Have Been Sold) Selling Complete Will Not Seperate $350

Right Hand Side Drivers Side Door- Selling With Regulator -(No Door Trims They Have Been Sold) Selling Complete Will Not Seperate $350

Left Hand Side Passenger Side Mirror- Black In Colour $100

Right Hand Side Passenger Side Mirror- Black In Colour $100

Rear Gts Wing- Black In Colour $150

Front Drivers and Passenger Seats in Very Good Condition Both $300 (Drivers Seat Sold).

R33 - Gts Series 2 Manual Computer $225

R33 - Gts Front Dash $100

R33 - Gts Tail-lights $150 EACH.

R33 - Gts Centre Console Clove Box $80

R33 - Gts Front Plastic On Dash With Hazards, Clock and Vents (Will Not Separate) $70

R33 - Gts Complete Rear Suspension Inlcuding Cradle, Diff, ABS, Disk Brakes Calipers, Lower

Control Arms, Shocks, (selling Complete Will Not Separate). $1500

Pictures Took Long To Load On Here Anyone Interested Send Me Ur Email Address And I Can Send You The Pics, All Parts Are In Very Good Condition, You Can Contact Bill On 0424-313-168 I am Located In Sydney Will Not Post Pick Up Only.

  • 4 months later...

Nissan Skyline Series 1 & 2 Parts For Sale In Sydney “PICK UP ONLY”

Complete Rear Suspension Includes the Following:

Diff Cradle

Diff

Disk’s Calipers

Uppers Control Arm

Lower Control Arm

Steering Rack

CJ joints Both Left And Right

Will Sell Complete Suspension For $1,150

Original Nissan Head Unit Plays CD, Radio, Tape. $200

Doors Both Left and Right Complete With Window And Reg (Black In Colour) $250 Each.

Plastic Dash Strip Including All Switches Such As Clock, Hazards, Vents, Power Mirrors, Coin Holder. $80

Whole Dash With No Cracks Minus Internals $100

Centre Console Box (As Seen In Pic) $80

Drivers Door Trim With Switches $100.

Computer From Series 2 R33 $200

Rear Tail-lights 1 In Black & 1 In Silver $100 Each.

Rear Boot Factory Standard Wing (Black In Colour) $100

Master cylinder $100

All Prices Above Are Negotiable...

May Also Have More Parts That Are Not Listed, If Interested Contact Bill On 0424-313-168

post-22011-1167786700.jpg

post-22011-1167786768.jpg

post-22011-1167786837.jpg

post-22011-1167786908.jpg

post-22011-1167786978.jpg

post-22011-1167787055.jpg

post-22011-1167787130.jpg

post-22011-1167787270.jpg

post-22011-1167790590.jpg

Edited by DR_GTR

Nissan Skyline Series 1 & 2 Parts For Sale In Sydney “PICK UP ONLY”

Complete Rear Suspension Includes the Following:

Diff Cradle

Diff

Disk’s Calipers

Uppers Control Arm

Lower Control Arm

Steering Rack

CJ joints Both Left And Right

Will Sell Complete Suspension For $1,150

Original Nissan Head Unit Plays CD, Radio, Tape. $200

Doors Both Left and Right Complete With Window And Reg (Black In Colour) $250 Each.

Plastic Dash Strip Including All Switches Such As Clock, Hazards, Vents, Power Mirrors, Coin Holder. $80

Whole Dash With No Cracks Minus Internals $100

Centre Console Box (As Seen In Pic) $80

Drivers Door Trim With Switches $100.

Computer From Series 2 R33 $200

Rear Tail-lights 1 In Black & 1 In Silver $100 Each.

Rear Boot Factory Standard Wing (Black In Colour) $100

Master cylinder $100

Original nissan floor mats the front and rears all complete as new $150

All Prices Above Are Negotiable.....

May Also Have More Parts That Are Not Listed, If Interested Contact Bill On 0424-313-168

  • 2 weeks later...
Nissan Skyline Series 1 & 2 Parts For Sale In Sydney “PICK UP ONLY”

Complete Rear Suspension Includes the Following:

Diff Cradle

Diff

Disk’s Calipers

Uppers Control Arm

Lower Control Arm

Steering Rack

CJ joints Both Left And Right

Will Sell Complete Suspension For $1,150

Original Nissan Head Unit Plays CD, Radio, Tape. $200

Doors Both Left and Right Complete With Window And Reg (Black In Colour) $250 Each.

Plastic Dash Strip Including All Switches Such As Clock, Hazards, Vents, Power Mirrors, Coin Holder. $80

Whole Dash With No Cracks Minus Internals $100

Centre Console Box (As Seen In Pic) $80

Drivers Door Trim With Switches $100.

Computer From Series 2 R33 $200

Rear Tail-lights 1 In Black & 1 In Silver $100 Each.

Rear Boot Factory Standard Wing (Black In Colour) $100

Master cylinder $100

Original nissan floor mats the front and rears all complete as new $150

All Prices Above Are Negotiable.....

May Also Have More Parts That Are Not Listed, If Interested Contact Bill On 0424-313-168

Nissan Skyline Series 1 & 2 Parts For Sale In Sydney “PICK UP ONLY”

Complete Rear Suspension Includes the Following:

Diff Cradle

Diff

Disk’s Calipers

Uppers Control Arm

Lower Control Arm

Steering Rack

CJ joints Both Left And Right

Will Sell Complete Suspension For $1,150

Original Nissan Head Unit Plays CD, Radio, Tape. $200

Doors Both Left and Right Complete With Window And Reg (Black In Colour) $250 Each.

Plastic Dash Strip Including All Switches Such As Clock, Hazards, Vents, Power Mirrors, Coin Holder. $80

Whole Dash With No Cracks Minus Internals $100

Centre Console Box (As Seen In Pic) $80

Drivers Door Trim With Switches $100.

Computer From Series 2 R33 $200

Rear Tail-lights 1 In Black & 1 In Silver $100 Each.

Rear Boot Factory Standard Wing (Black In Colour) $100

Master cylinder $100

All Prices Above Are Negotiable...

May Also Have More Parts That Are Not Listed, If Interested Contact Bill On 0424-313-168

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...