Jump to content
SAU Community

  

65 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

remember though, this could have the potential to plough into a guardrail, i dont want to die on impact. also, what do they look like again, i think i know the one you mean, but cant remember?

i know what its like to drive AWD (i know the gtr is different) i own a subaru and i owned a very tail happy GTi-R. let me rephrase it sorry.

i want a car that i have to put a lot of skill and practise into to get to the same level as a gtr. if i bought a gtr people merely assume that its the car that is good and not the driver. i want a car that will help me develop my driving skills and technique to a much greater level.

the familia gtr and the gtir arent really good options now after having seen two friends blow up their gearboxes and diffs recently. so that narrows it down a bit. i have also heard that the early evo boxes are very weak, similar to early WRX boxes?

daveo that was exactly the response i was looking to get from someone. the sr20 idea was the DET not an n/a one, what would be the point in that? wtih the roof, i will be installing rollover bars in the event of anything happening. in regards to the bullet cars. well, i wouldnt go as far as they did but its the whole drivleine setup that i was referring to with them. i would obviously do the minor chassis changes with the engine upgrade as well. the bullet roadster i am referring to is actually the one they built with A 20BTT in it. it was a while ago now but it was road legal. i spoke to them about it and they said as long as you do it all by the books and can keep it under the emmissions level there shouldnt be too many issues. its not too hard to intall, just the mounts and lining it all up really.

with your idea of keeping the stock motor, a mate of mine actually had a similar idea. the mx-5 came out with the b6 engine in it. now he suggested i put a b6t or bpd engine out of the familia's into it. the b6t is the same engine just turbocharged out of the familia gtx's (stronger internals though) and the BPD is the 1.8 turbo out of the gtr familia's. since the stock motor and both familia engines are fairly similar the change over shouldnt be too hard and neither should the compliancing.

i will have 16k to play with, up front when i do this (my last car was stolen) so there wont be a need to save up for anything really.

The few mates I have who have owned evos (actually gsrs, with full evo3 conversions gearbox and diffs included) and they seem pretty tough, maybe not as good as supra 6 speed... But they copped a fair bit of abuse, as in hard launches, bit of clutch kicking trying to drift in the wet etc. Really whats going to kill the box is being harsh on it, cluch dumps etc, which dont equate to a quick lap time anyway. But they are def stronger than the familia and WRX boxes.

I cant imagion the stock MX5 box is going to be overly strong either? Nore for that matter the box that you will put with the rotor.

Once again as you probably know the familia GTR motors had some forged internals, and a turbo thats approx x2 the size of the gtx one. So if it can be dropped in it probably wouldnt be a bad option. FWD to RWD I dont know how you will go.

But back to which car to get. Really, if pratcially isnt an issue go the MX5. Just keep in mind stuff like rain, wet track days, etc etc. And roll bars will help, but it still aint a roof :D . So if you dont mind getting your seats wet, have no need for more than 2 seats or 2 doors, dont really need much of a boot etc. Then the mx5 is probably the way to go. If not Id be looking at the EVO thing a bit more.

The few mates I have who have owned evos (actually gsrs, with full evo3 conversions gearbox and diffs included) and they seem pretty tough, maybe not as good as supra 6 speed... But they copped a fair bit of abuse, as in hard launches, bit of clutch kicking trying to drift in the wet etc. Really whats going to kill the box is being harsh on it, cluch dumps etc, which dont equate to a quick lap time anyway. But they are def stronger than the familia and WRX boxes.

I cant imagion the stock MX5 box is going to be overly strong either? Nore for that matter the box that you will put with the rotor.

Once again as you probably know the familia GTR motors had some forged internals, and a turbo thats approx x2 the size of the gtx one. So if it can be dropped in it probably wouldnt be a bad option. FWD to RWD I dont know how you will go.

But back to which car to get. Really, if pratcially isnt an issue go the MX5. Just keep in mind stuff like rain, wet track days, etc etc. And roll bars will help, but it still aint a roof :) . So if you dont mind getting your seats wet, have no need for more than 2 seats or 2 doors, dont really need much of a boot etc. Then the mx5 is probably the way to go. If not Id be looking at the EVO thing a bit more.

with the gearbox, we were planning to put either a 5sp supra box or rx7 box in, both of which are pretty strong and can take a bit of abuse.

with regards to the familia engine. i think the only issue wit the transplant would be the mounts. the engines themselves arent too different. if i managed to get a BPD, and put it in a 1996 model (1.8 with popup headlights) i dont think there would be too many problems. they are the same engine block really. the familia has the bpd while the mx5 only has a bp. so i dont think there would be any issues there except making new mounts.

i'm looking at purchasing a racing hardtop from bullet, they are about 4500 (1500 more than stock ones) but have extra supports (i think its like a mini roll cage) built into the roof and heavy duty latches in case you do flip it. i will also install the rollover bars as well and racing harnesses. also, they do have a soft top standard so rain isnt really an issue?

Because Rohan, they are more like $60k than $16k :)

Yeah, true. but they are cool. how about a gts-t they rocks, can get a high powered one for 16k... or spend 11 and then 5k straight out.

but on a more serious note.

GTR - French for Not even your mum is this crazy.

I didnt think they were much quicker then a gts-t until i was in a high tuned one.....

gts-t it is the baby brother can go quick but dont try to out do one in racing. mind you they are still bonkers to drive at high speed corners.

mx5 - bang for bucks nice car just make sure you dont make it too front heavy, the 06/07 ones are quick.

evo - like a 4 door GTI-R, mitsubishi got the nail on the head. quick car, set up right can do some insane lap times.

I like the idea of turbo-ing the stock engine, dont have to spend much, and can spend money elsewhere.

Yeah, true. but they are cool. how about a gts-t they rocks, can get a high powered one for 16k... or spend 11 and then 5k straight out.

but on a more serious note.

GTR - French for Not even your mum is this crazy.

I didnt think they were much quicker then a gts-t until i was in a high tuned one.....

gts-t it is the baby brother can go quick but dont try to out do one in racing. mind you they are still bonkers to drive at high speed corners.

mx5 - bang for bucks nice car just make sure you dont make it too front heavy, the 06/07 ones are quick.

evo - like a 4 door GTI-R, mitsubishi got the nail on the head. quick car, set up right can do some insane lap times.

I like the idea of turbo-ing the stock engine, dont have to spend much, and can spend money elsewhere.

that was very well put. but with that in mind i'm gonna have to rule out the evo. already owned a gtir, looking for something very different, not similar.

Ahh yes i forgot about that.

some more info.

R34GTT - always liked these but they were still a bit big for me, have all the mod cons and warranty sometimes, got the engine backin, but not something you can throw around a track quickly.

Series 5 Rx7 - My brother had one, love the rotary, didnt like the car. I much prefer the series 6 on the fd shape.

i wanted an FD more than anything, but then i saw the price tag :) *walks away crying* if i could afford one i would buy it, they are the essence of hotness!

no, i think i've settled on the original idea of the mx-5. still not sure on what i'm doing with the engine though. would love a 13btt in it (20btt exceeds the power to weight ratio set by QT, bastards!) but it seems like its going to be a lot of hassle.

Officer: Now son a 20b has 3 not 2. so whats the go?

You: It is a 13btt officer i swear, see 1,2 and a half, thats just the timing case with the timing chain not another rotor....honest.

haha you'll be right. :S

the mx5 sounds like a plan, should be good to see a hotted up one.

lol, nice, i could actually see myself saying that to him "no, i swear its a fake, for rice effect!"

thats an understatement! i have already sourced the widebody for it

post-33792-1167954486.jpg post-33792-1167954499.jpg post-33792-1167954508.jpg

have to order it from japan, just under 4k :) but looks damn fine :)

i was just browsing through mx5mania.com and they have forged pistons for under 1k and turbo kits for less than 3k. so for 5k roughly i could be running 20psi through the stock engine :O probably make about 200 rwkw in a 900kg car ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...