Jump to content
SAU Community

Recommended Posts

Simply get more power to get better times

It really depends on how much money you have to spend

First probably get a full exhaust, then air filter, then cooler and up the boost.

After doing those standard mods you can do bigger things like change the turbo

Also because you have a gtst it'll be hard to beat a wrx off the lights because they are AWD. You will catch up to them once you get traction after some simple mods

Originally posted by playa

yea i got exhaust air filter intercooler, so next step get....

* Exhaust Cam Gear ($250)

* Boost to 10-12psi ($200)

* PowerFC ($2000)

* Good quality tyres ($1100)

* Pineapples ($150)

Forget the bigger turbo, the extra power you make out of it will be lost in hitting boost and putting the power to the ground. You want a constant steady power curve to give you instant power and the stock turbo will deliver more than enuff power for this.

If your -really- after a 'bigger' turbo just get the stock turbo hiflowed, once again it will deliver more than enuff power and will boost up similar to the stock turbo.

Now how many people spend heaps of money on their engine but forget that somehow they actually have to put all that power to the ground? Do yourself a favour and buy a set of good quality tyres (back atleast).

Pineapples will give the rear end better squat and will force the car into launching harder in a straight line which is exactly what you need.

Note: The only experience I have is reading forums, not putting theory into practice. But thats only until I get a good set of tyres.

okay, nice wide wheels at the rear will help.. trust em i know.. i have shit tires and it sucks getting off the line. Even with minor mods and only 10psi i can boot it any surface or i get wheel spin :)

My car also has a different diff, which gives more accel, less top speed - to changing your diff to a higher ratio should also help. I think a std is a 4.11, so a 4.5 or more could be good. Only thing it will put your highway revs up a bit - mine revs at 3100rpm at 100km in 5th, compared to 2700 rpm std.

After exhaust and more boost, I'd look at getting the power to the ground.

Good tyres

Good alignment

Clutch/flywheel

Suspension setup for drags (pineapples etc)

Mechanical diif (2 way etc)

And as dAVE said, higher final ratio.

And lot's and lot's of practice.....

You may not need to do all these things to beat a WRX, but hay, why not :)

J

All you really need is some aftermarket management I reckon. A Super AFC or preferably a Power FC should give you that bit extra to get ahead in the 0-100. Just practice your launches. It's easier to launch a Skyline than a WRX (assuming they aren't doing a clutch dump - and if I owned a rex, I'd be taking care of my gearbox) as you can get some wheelspin to stop bogging off the line, and they can't.

You just need to get off the line better...

Pineapples...

Adjustable rear upper arms...

maybe bigger rubber rear but you could just try really good rubber first...

good clutch...lighten the flywheel while your changing it...

Maybe a mechanical diff if you're really serious or lock it if your too serious.

You may need more power but even iof you do later, you will still need these mods to get the power down effectively, they are cheap (relativly to some of the engine mods suggested above) and will get you off the line like a rocket...

I think you would be surprised at the difference this would make.

cheers

russ

If you have enough power is it actually better to have longer gears so you dont waste time changing gears....ie you have enough power to spin the wheels way too much all through second and into third anyway...

If you had a very low ratio diff like a 5.1 it would technically accelerate faster in gear but you might have to be in third to get to 100km/h...wasting time changing gears and much wheel spin...if you had a 3.9 or a 3.7 you might just make it to 100km/h in first??

You have to have enough power though...

Not too sure

Russ

Get a set of wide normal profile soft sidewalled tyres.

I.e Simex in a 225 50' 16" grip on my car very well. I can launch with them up around the 4500rpm mark with bugger all wheel spin. Simex are cheap, not rotational and spin like hell in the wet, a very dangerous tyre in the wet. I almost lost it by ever so slightly coming on to high boost in third gear at a low rev.

For a decent amount of sidewall flex, so that the tyres is flattened out on to the road when you launch you need at least a width of 4 fingers. Side wall width that is. :)

It is pretty difficult to beat a WRX off the line.. Even GTR's have trouble.. WRX's are full time 4wd that is why they break so many gearboxes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...