Jump to content
SAU Community

Recommended Posts

  • Replies 380
  • Created
  • Last Reply

Top Posters In This Topic

He runs Bridgestones through his fleet vehicles and the Dunlops have always been more expensive..............

I don't get it. If you are doing Targa, even the most expensive tyres around are your cheapest expense. I have no idea why people are running tyres based on price. I don't think the boys are blaming tyres for their bungee jump, but if it was a consideration I see a lot more than $1600 in damage... Hope the bug has bitten enough to get you back. A reshell will cost a fair bit of time, but thats about all...

Noticed you snuck in a pick Kel... thank you

TT

Edited by Targa Tom

no problems at all with the brakes, and they take a hammering on the tight stages 100->50, 100->50, repeat 30 times lol. Had the wrong pads on the first day and they got chewed up, changed to the race compound after that and they were great. Will take them off and have a proper look in the next week or 2.

I don't get it. If you are doing Targa, even the most expensive tyres around are your cheapest expense. I have no idea why people are running tyres based on price. I don't think the boys are blaming tyres for their bungee jump, but if it was a consideration I see a lot more than $1600 in damage... Hope the bug has bitten enough to get you back. A reshell will cost a fair bit of time, but thats about all...

Noticed you snuck in a pick Kel... thank you

TT

There for a good while the Dunlop's (D01J sorter days) were more expensive than the Bridgestone's (RE520/RE540) for little to no gain and with brand loyalty I guess people don't know how much of gain can be seen in recent release tyres until they try them.

As we all know, price doesn't always equal performance alone - the P-Zero Corsa would have to be one of the hardest, nastiest tyres I've used and they are also one of the most expensive... lets not even mention Advans!

I guess the moral of the story is to try as many tyres as you can on the car you will be using them on (and tune your suspension and pressures accordingly) and make a personal choice or be lead by people you trust.

you would have to say it looks like the roll cage saves 2 lives. it looks like some very hard impacts on the roof. send a thank you note to the dude that welded the roll cage!

such a shame, but that's tarmac rally for you. >_<

Just a quick note to ask who's doing what upcoming events. I may jump in with Catchy in his Evo IV for Rally of Burnie (he won it last year so the pressure will be on!).

Then it's back into the 34 for Buller which I haven't done before so am lookin forward to it! :ninja:

For those who've done Buller, do you reckon there's much use in screwing up some power given we're not held back by Targa type rules?

Just a quick note to ask who's doing what upcoming events. I may jump in with Catchy in his Evo IV for Rally of Burnie (he won it last year so the pressure will be on!).

Then it's back into the 34 for Buller which I haven't done before so am lookin forward to it! :)

For those who've done Buller, do you reckon there's much use in screwing up some power given we're not held back by Targa type rules?

Don't know about the HP race up Buller, but we will be at Burnie I reckon... Just waiting to see what they have planned for it. Lots of Rumours... Burnie to be biased toward ARC Tarmac round and Rally Tas to be a stick with the Classic market.

Either way the 3 of the best 4 Tarmac events are in Tassie, so we are spoiled ATM

TT

We were talking to Brian Tarratt, and he said that some GT-R's were running Nismo option parts, as when you bought a GT-R, you could get anything from the Nismo catalouge fitted and warrentied as an option part.

I don't know if R32's had the option for 18's, but I know that one of the R33's were running Nismo 18" wheels amoungst other things.

Maybe jump back in the Ute for Burnie.

While im here can anyone explain to me why you can run 18s on a 32 GTR?

I am not sure, but told Holywood to check the tyre regs closely... I can't understand anone running 18's because it limits your tyre choices... 32's had 16 x 8 std and therfore could run maybe 17s Benno can probabley help us here.

Again, one thing that Targa does teach you is how to read regs and research in a way that suits your cause.

TT

Yeah we'll be back for the lake mountain and buller sprints for sure, can't wait.

With the gtrs, the n1 had 17x8 wheels (standard only was 16x8). Since the Nismo options were allowed that opened up 17x9 or 18x8 wheels - I think it was for this year only. Steve from Just Jap could confirm we took his advice on this one.

17x8 seemed fine to me, fitted over the brakes and I could afford the tyres, they get a lot more expensive and hard to get sizes in 18s.

Nismo optioned a host of rims up to 18x10 for various GTR models, but not for all models.

eg R33 GTR can run standard 17x9 or up to 18x10 in the case of Dave Ayers this year who was the only wearing the proper Nismo rims. There is not compete freedom as the size you run must be listed and published by Nismo so in the case of the R32 GTR you could run a 16x8 if its a base model, 17x8 if its a V-Spec/V-Spec II or N1, or if you drawn on options 17x9 as Thatch did, or up to a max 18x9 as Tony did. No 18x10 was listed for R32 GTR. I've got a list in the office if anyone wants to know more.

Previously the rules were you must run the rim size as fitted standard, and thats still the case, but if there is a listed option from time of sale then you can drawn on it.

Rim options will remain a freedom for some time to come, but engine and suspension options particually have been limited under the latest revise of the regulations and components like 80mm exhausts and thicker radiators where given grace this year only as the revised technical regulations were only released the Friday before this years Targa.

Hope this helps...

Edited by t01-100
Nismo optioned a host of rims up to 18x10 for various GTR models, but not for all models.

eg R33 GTR can run standard 17x9 or up to 18x10 in the case of Dave Ayers this year who was the only wearing the proper Nismo rims. There is not compete freedom as the size you run must be listed and published by Nismo so in the case of the R32 GTR you could run a 16x8 if its a base model, 17x8 if its a V-Spec/V-Spec II or N1, or if you drawn on options 17x9 as Thatch did, or up to a max 18x9 as Tony did. No 18x10 was listed for R32 GTR. I've got a list in the office if anyone wants to know more.

Previously the rules were you must run the rim size as fitted standard, and thats still the case, but if there is a listed option from time of sale then you can drawn on it.

Rim options will remain a freedom for some time to come, but engine and suspension options particually have been limited under the latest revise of the regulations and components like 80mm exhausts and thicker radiators where given grace this year only as the revised technical regulations were only released the Friday before this years Targa.

Hope this helps...

Is there anything at all for S15's in the nismo catalog?

I like the picutre with my legs hanging out. The dukes of hazzard made it look so easy!

As to tyres, as Duncan said, price does not always equal value or performance, and you really need the right tyres for the event you are doing. Same applies to compound. I'm not blaming the tyres (well not totally anyway) and really can't fault the bridgestones in the dry, they were good when they got some heat in them, but when 4 days old and cold, they absolutely suck in the wet.

We didn't have bad traction, they just let go completely without warning, and we were only doing a very low speed 40-50km/hr max. Those who saw us go over the bridge will testify that we weren't pushing hard.

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...