Jump to content
SAU Community

Recommended Posts

I have mine there in the pillar but if you have a single din cd player you could mount it in the empty space under that??

Looking to install my boost gauge soon and im looking for some ideas on where to mount it

I have thought about an a pillar gauge setup, but i dont want to get defected for it

Any ideas?

post-18755-1168298217.jpg

I was just thinking then..

Take the vent out at the bottom of the a pillar and fibreglass the gauge into that

Hmm...might have to research some more

Will check out the mearcat pods - thanks :thumbsup:

Keep em coming :rant:

Hay ENDOREAN, that is exactly wher mine is, The boost guage is in teh old cigaret lighter hole, with the new cigaret lighter being in the glov box, so i can still use the power socket. Only thing is i had to spin my guage arround so that the 10 psi mark is at the top, as i couldn't see it properly from the driver side.

I made up an insert wher the ashtray use to be, and teh controller is mounted in that. Looks smick.

Awesome, have you got any pics of your setup?

I want to put in a boost controller in the same spot but I'm not sure how to do it. I just drilled out the back of the ashtray to put the turbo timer in so the face of the ashtray still works (keeps it hidden from the fuzz).

take out your ash tray...cut a piece of thin wood\plastic, spray black or wateva u need to do to make it nice.....and mount guage in there

looks clean, good fit and u use up space that you would only use if u smoke....which i would hope u wouldnt smoke in ur nice skyline :P

but ye thats where mine is

cheers

post-12579-1168382951.jpg

great looking gauges.

no a-pillar for me. dont want the hassle. i've got mine mounted on my steering column, so its in view between tacho and oil pressure. i'll take a pic in a minute and show you.

edit: here's the pic

post-29392-1168384731.jpg

Edited by Munkyb0y

Hay Endorean, all i did was to get some 6mm MDF and cut to fit the ashtray hole. I then cut out the hole for the controler and mounted it all up. I painted the thing black. Once the paint was dry i glued on some black plastick on the front of the cover. The plastic came form one of them black folders you use at school, the one with pockets in it. LOOKKSSSS factory. I then put some double sided tape in the ashtray hole lip and stuck it in. Will take pics and post them up.

A good stealth look is to mount the guage in a cup style guage holder on the steering column on the lower left side - at about 7/8 o'clock. So you can see it through the gap in the steering wheel arches. Can't see it at all from the drivers window (looks stocko when Mr Plod looks in!) but is a suprisingly easy spot to check when driving as you don't have to look to the left/right - just down a bit. Works for me :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...