Jump to content
SAU Community

Recommended Posts

go to the shop and read the back of each oil. only look at the ones with the prices you would like to pay. buy something that fits the way you feel about your car. thats what i do.. either mobile 1 magnatec or last time i used something else which i cant remember ahhaahhaha

Guest Boxhead

motul 8100? i didnt see that one, ohwell

i use motul 6100, its like $4 cheaper then mobil one at the auto barn i was at, and $10 cheaper then the castrol formula r, i just put it in last nite, and i think the car is smoother then the other stuff in it from compliance...

but motul has a way better cap thing on it, you can pull it out and so its much easier to pour :)

Where can you buy good quality oil from in 20L drums? That is the cheapest way to buy it apparently.

Edit: Erm, not "the" cheapest, obviously, but probably the cheapest while still remaining somewhat practical.

I bought some motul 8100 because I was too lazy to drive further from home in search of (cheaper) mobil 1. besides which, the mobil 1 I had in the car broke down quite suddenly at around 7500km since being changed. that kind of end-of-life knee worries me, it's too quick. I guess you REALLY know when the oil's had enough though.. "holy christ it's below the low mark and it's turned really dark!" (previous checks had all shown very little oil usage and still light golden colour)

hmmmmmmmmmmm..... :O

Castrol R synthetic is an excellent oil. Pricey but im a great believer in you get what you pay for. If your engine hasnt been using synthetic oil previously you will find that for the first 5 to 10,000kms you will burn oil. This is because your bedding in the bores to suit synthetic oil.

Try Tufoil additive. Its in the guiness book of records as the slipperiest oil additive in the world. They ran an engine that had the oil drained containing Tufoil and it ran 8 times longer than the second longest engine with i think Slick 50 added to it. My engine still looks brand new inside.

Michael...

Changing the oil is the same as every other car, just remove the filter and sump plug, let it drain out, put new filter on and plug back in, then fill up with about 4.5 litres of your chosen oil.

I personally change the oil every 5000km instead of every 10000, burnt oil deposits are the main cause of turbo bearing failure so you want it as clean as possible all the time.

jim x thanx.

now with regards to the sump plug-is it located underneath the car??? my magna's one was about drivers side underneath the car.

where is the sump plug for the skyline and more importantly how do i take off the oil filter off. It looks like in a tight position. can i buy a normal oil filter for my skyline. sorry about these qns.

cheers

The plug is towards the back of the sump, I *think* on the passenger side but I really can't remember. I always have to look for it again whenever I change the oil (3 times now) and never take a mental note.

The oil filter can be removed by hand if the previous owner has done it up properly (ie, by hand). Try using a rag to get a better grip. Failing that, try using a filter spanner, but I don't know which type will fit because I've (luckily) always been able to remove it by hand.

Normal oil filters are fine, just make sure you get the right type. I don't know what that is, I just ask my spare parts shop for an oil filter to fit a '95 turbo Skyline and he gets me the right one.

Just to stir the pot,below is a quote from another forum by a guy that says he works in the industry.If you want to read the whole thread here is the address:

http://board.performanceforums.com/forums/...&highlight=agip

"This whole comparison thing is killing me, so i will state what we found is best OVERALL for a turbo charged vehicle after several months of testing in the lab and on the dyno. But, i also must say that it is no reflection of how much better or worse and what is best for eveyones cars out there. Some might be better for performance, some for anti wear and some for length of life.

When i get the chance i will post the full mcdaddy on a new thread that will have an explanation on the outcomes along with graphs on several of the factors listed. So here is what we found to be the best products for a turbo:

1. Elf Excellium 0w40

2. Mobil 1 0w40

3. Agip sint 2000

4. Castrol formula r 0w40

5. Motul 'somthingorather'

6. Mobil 1 5w50

7. Shell Helix (xWx)

so on and so forth...i cant remember the type of motul or type type of shell off the top of my head and there were a couple of more we tested."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
    • I haven’t yet cut the chassis, maybe I switch to a reverse flow. I’ve got the Intercooler mounted as I already had it but not cut yet. Might have to speak to an engineer 
×
×
  • Create New...