Jump to content
SAU Community

Mongoose M80g Or M80au

rb25_r32

By rb25_r32,
in Car Audio & Electrical

 Share

Recommended Posts

Chris Rogers Grand Master

Chris Rogers

Posted
Posted
But even if its out of sight, if you've got a little valet button under your panel, and can follow the two wires back somewhere, you'll find the module pretty quick?!

maybe... :P

I'm not going to disclose how I do these cars just that I do them.

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Trav33 Mentor

Trav33

Posted
Posted

So maybe the best way to install an alarm is not to install a valet switch, or flashing LED, and pull all the dash out and hide the module well away, and tap into the wiring loom up under the dash, not near the ignition barrell...

Xizor Mentor

Xizor

Posted
Posted

i have M80G with microwave sensors, or is it ultrasonic? f**k i cant remember. Anyway dont think i've ever had false alarm with it, but if u leave the window down and a someone sticks a finger inside the car, they go off! Wind would probably do it too i imagine if the window was down and it was armed. I like it! :sleep:

  • 1 month later...
sumguy Enthusiast

sumguy

Posted
Posted

bought the m80G off ebay for $215, its alright, nothing special to me. However, when you turn off the car after 30secs it will automatically immobilise the engine with a small chirp. Damn this feature is VERY annoying to me and whoever buys this alarm

bluey33 Experienced

bluey33

Posted
Posted (edited)
However, when you turn off the car after 30secs it will automatically immobilise the engine with a small chirp

THis meaning it wont effect my turbo timer which is set to 30sec?

Chris i think i read u install them but think your in sydney... Are these mongoose alarms off ebay same stuff you would use or is their a catch to buying them off these guys?

Edited by bluey33
HUNTZ Contributor

HUNTZ

Posted
Posted (edited)

HI ALL,

I have an M80s which has been working fine with my Greddy turbo timer until i decided to see if it was possible to lock the doors while the turbo timer was shutting down. Since then the central locking hasn't worked when i arm my skyline. Has this happened to anyone before? Or is it possibly just bad timing and has nothing to do with the fact that i tried to lock doors as timer was shutting down and is more to do with the central locking motor giving up (dying) on me?

CHEERZ.

Edited by HUNTZ
HUNTZ Contributor

HUNTZ

Posted
Posted (edited)
does it work otherwise? IE if you disarm/rearm will it lock the car?

HI CHRIS,

Thanks for replying so quickly. Appreciate it. No, central locking no longer works, manual locking only,ie. key. Turbo timer works fine as all ways so does alarm, minus the c/locking side of things any way. Whats happening is that when i switch off ignition turbo timer kicks in for its 30 second cool down, 30 secs after that alarm imobilises engine then I hit button 1 to arm, alarm is now activated as usual just doesn't want to lock doors any more???

CHEERZ...HUNTZ.

Edited by HUNTZ
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

depends. from that it would appear that the rod has slipped. other thing of course is a blown fuse onthe alarm- IF that is the case I would look at the wiring going to teh actuator BEFORE replacing the fuse.

HUNTZ Contributor

HUNTZ

Posted
Posted (edited)

Thanks Chris will look into it and let you know how I go. Please excuse my igrorance, but actuator? (sorry mate for asking what is probably a very self explanitorary question.)

CHEERZ.

PS. are there two rods? ie. lock and unlock, likewise with fuses?

Edited by HUNTZ
HUNTZ Contributor

HUNTZ

Posted
Posted

Chris mate you're a bloody champion!!!

Cheerz heaps for all your assistance on this. Sliding performance has a great picture of an actuator which I came across while looking for bitz'n'pieces so now with your help and their flick I know what i'm looking for.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...