Jump to content
SAU Community

Recommended Posts

Sound quality is HEAPS better with splits Correct.

How much are you looking to spend, do you want some advice on quality brands ? What price are you looking to spend?

Where are you located so we can recomend some good dealers to go to.

George

Righto George, I am keen for some decent advice on the speakers. I have all of the other components for the system and now I need to match some decent speakers so I can get it all installed in one go.

Here is what I have so far:

- Kicker KX200.2 Amp (for the sub)

- Kenwood 200W RMS 12" sub

- JVC KW-AVX700 head unit (http://www.jvc-australia.com/JVC/client/c_...&prodID=173)

As far as speakers go the guys on the forum have convinced me to go with 6.5" for the front and back.

I don't really want to spend more than $200 on a set of front splits and the backs don't need to be anything too flash. The speakers will be running off the head unit so I need to find speakers that are going to match the HU right?

My original plan was to go with a set of Alpine SPE-17CS ($138) 35W RMS splits for the front and a cheaper set of Alpines for the back. I am not too sure of the output quality of the HU (20W RMS?? is what I was told) and have been told that the above Alpines will certainly match it well. This is my main concern as I don't want to waste money on better speakers unless the HU is gunna have the power to drive them.

Anyway guys, give me your advice on the above. Would you go with the Alpines? What others would you suggest? Don't want to spend more than $300 all up for front and backs.

BTW George, I am in Nth Ryde. Always happy to purchase via the net or through your recommended dealers. Let me know.

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2820263
Share on other sites

I put kenwood dual mag? splits in rear of mine and they sound good. Also put 5x7 pioneer 2 ways in the front doors. with 10 inch sub sounds great with not too much weight, I guess it's getting late, I don't think this ryme an't great.

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2820564
Share on other sites

I put kenwood dual mag? splits in rear of mine and they sound good. Also put 5x7 pioneer 2 ways in the front doors. with 10 inch sub sounds great with not too much weight, I guess it's getting late, I don't think this ryme an't great.

can vouch on that one.sounds real crisp...

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2820919
Share on other sites

righto now i am confused... i thought i was making the right decision by using splits in the front and some 2 ways in the back... these last few posts are contradicting that completely... AAHHH WHAT TO DO.....

Personally i've liked components in the front and the rear (tried it a couple of times) and to me it just sounds that the are fighting each other with the top end (my personal opinion) and they synch just didn't seem the same.

Personally i always go a good set of splits in the front with 2ways in the rear (normally i dont worry about rears anymore) and i've been playing around with different sub applications (at the moment trying to perfect a dual bazooka tube) and i only run a 4channel amp now.

This is mainly to cut costs and the fact that i spend money on the go before the show now and im not really fazed with the boom boom anymore, just like to have a nice crisp sound while im at the track :huh:

Speak to some of the pro guys on here like Chris & George as im sure they will be able to give you alot better idea of audio set up and get the best sound from what you already have :(

Good luck with it what ever way you go.

GMB

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2820920
Share on other sites

OK guys. Going to get new speakers today for my r32. Question is should I get splits 6's for the front or just go with some 2 way coax?

Is the sound quality heaps better with the splits or not?

yes.

If ur on a tight budget, forget the rear fill's, spend the money u save there on a good set of front splits, amp them if u can for good mids n highs. Ur already running a sub thru an amp so thats the lows taken care of.

Dont forget sound deadening, well worth it if u can afford it. If ur on a tight budget, just sound deaden as much of the doors as u can afford, then move on to the boot if ur budget allows.

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2822343
Share on other sites

Might be better to pick your splits first - there are so many different sounding ones you can get, warm sounding ones (for vocals), harser sounding ones which might be better for loud dance, etc etc etc. Go and listen to some, find a pair that suits the music you normally listen to, then get the right amp to drive them.

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2832469
Share on other sites

Just don't bother with rears. Combine the price you wanted to spend on them and just get fronts.

Check out the lower end of the Boston Acoustic gear.

Agree.

I've got a pair of JL splits at the front and replaced the rear speakers with some xplods that are a few years old.

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2837837
Share on other sites

OK i have narrowed it down. I am after a set of splits that will match the Kicker IX404. I am considering SoundStream XSC.6 6.5" and want to know if you guys think it is worth spending a bit extra and getting the Tarantula TRC.6N 6.5"?

Will there be a noticeable difference in the two?

Also, what would you guys recommend... the SoundStreams or a set of Kicker K6.2 splits?

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2838569
Share on other sites

Im running some cadence 6.5inch splits in the front, cadence 6 inch 2-ways in rear and a 12inch sub in the boot and i get some sweet sound out of that, in my opinion go for the splits i really noticed the difference when i got mine.

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2838786
Share on other sites

, what would you guys recommend... the SoundStreams or a set of Kicker K6.2 splits?

neither. Kicker and Soundstream r more better for amps and subs. For front splits brand to look out for r Hertz, Boston, Focal, DD, Morel, Rainbow, Dynaudio, etc. Last 3 r quite expensive. All these brands, except last 3, have something for each price range. There all good just depends which u think r better, which can only be done by listening to them. Some might have harsh tweeters, lack of midbass compared to others, etc

Also the best cheap splits r the Jaycar 6.5" Kelvar Splits that can be had for $150 :)

You can get these from:

www.fhrxstudios.com/

Doran Pro Audio

Link to comment
https://www.sau.com.au/forums/topic/151518-splits-or-not/#findComment-2844197
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...