Jump to content
SAU Community

Rb20det Motor

BH_SLO32

By BH_SLO32,
in Classifieds

 Share

Recommended Posts

BH_SLO32 Proficient

BH_SLO32

Posted
Posted (edited)

PPL,

Last weekend I did an RB25 conversion in my Dads R32 skyline (was my previous car). The RB20DET motor is now up for sale. It has 166,xxx kms on the clock and is still in excellent running order.

Included: coilpacks, platinum plugs, injectors, power transistor, intake and exhaust manifolds etc (refer photos). The cam covers were professionally painted.

Not included: wiring loom, turbo, engine mounts, RB20 temperature sender (has an RB25 sender).

Price: $250 neg

I want this thing gone to make room for my next project

post-16836-1168749896.jpg

post-16836-1168749961.jpg

post-16836-1168750013.jpg

post-16836-1168750063.jpg

post-16836-1168750108.jpg

Edited by BH_SLO32
Link to comment
https://www.sau.com.au/forums/topic/151649-rb20det-motor/
Share on other sites
BH_SLO32 Proficient

BH_SLO32

Posted
  • Author
Posted
is the rb20 in good running order? can u do a compression test?

Yes the motor is in good running order. I can't do a true compression test as the motor is out of the car, however I can manually turn the motor over and get some compression readings.

Cheers,

Ben

Link to comment
https://www.sau.com.au/forums/topic/151649-rb20det-motor/#findComment-2839415
Share on other sites
  • 5 months later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...