Jump to content
SAU Community

Recommended Posts

anyway i changed my plugs again then i took it for a drive everything was perfect, until the next morning driving to work i give a little bit and a notice a small misfire.

i go for a drive at lunch time its a pig again idels shit aswell,

can someone please help and yes iv searched

Link to comment
https://www.sau.com.au/forums/topic/152448-r32-gtr-misfire/#findComment-2846481
Share on other sites

never try to regap iridiums they are set at either 0.8 or 1.0 for a reason if you wanna run a smaller gap use ngk or bosh cheapies

and a 0.7 gapis prolly the reason you are getting the missfire

i run ngk @1.0 mm and never have a problem

Link to comment
https://www.sau.com.au/forums/topic/152448-r32-gtr-misfire/#findComment-2846865
Share on other sites

but thats the thing race pace gaped my periously irudiums to .7

and now this my second set off the plugs this week iv got platinum's now,

but what i dont under stand is why is mis firing same plugs same gap,

this is really pissing me off

Link to comment
https://www.sau.com.au/forums/topic/152448-r32-gtr-misfire/#findComment-2846902
Share on other sites

thhis really starting to piss me off, i just tryed the copper plugs aswell, 1st i gapped them 2 .8 was a lot better but still had a miss above 7000rpm, then i gapped them to .7 was fine for the first drive to the car wash, i washed my car driving home from car wash missing like a bitch again,

i wanted to fix this b4 the cruise tomorrow, please help someone

Link to comment
https://www.sau.com.au/forums/topic/152448-r32-gtr-misfire/#findComment-2850679
Share on other sites

perviously as stated iv gapped them b4 with no problems just un plug my coils one at a time and the idle change on every one, so its not the coils

that doesnt eliminate the coils at all...

only if the miss is at idle...which its not.

try a new set of coils dude, swap with a mate or something, cheaper than going to a shop,

Link to comment
https://www.sau.com.au/forums/topic/152448-r32-gtr-misfire/#findComment-2856808
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...