Jump to content
SAU Community

Recommended Posts

ok, lately Ive been having problems changing into gear, its been getting harder and harder until finally its at a stage where its so stiff its pretty much un-driveable.

the car is a R32 GTS-t Manual, roughly 150rwkw and stock clutch.

so symptoms, like i said really hard to change into all gears, but mainly when stationary, when moving i think (not 100% sure) double clutching seems to help. Also i think after a while of driving it seems to get better. so this had me thinking mainly it was gearbox related.

until today, i went to start my car which is always left in gear, clutch fully in and when i went to click it over the car rocked like as if u tried to start it in gear but not as harsh. Then once it was started it was still a bitch to get in gear, once i got out of the driveway almost impossible to get into gear, when i had the clutch completely in and tried to put it into 1st and 2nd etc it seemed to start moving forward even though it wasn't even in gear, just pushed down hard trying to get it into gear.

Anyway back to last night clutch was always a possibility so there were a few things i had noticed, the clutch did feel a bit weird and possibly lighter with a lot of slack (could be my imagination), and also i did the drop clutch test, in 1st gear in semi wet conditions with new 225's on the back i revved it up and dropped it rolling at about 10ks and it spun up straight away. I have tried the same with 2nd gear before and no cigar, clutch slipped like a bitch.

To be honest i didn't really think the clutch felt like it was slipping at all during normal driving or even real hard driving (not including clutch kicks) so i still thought i had a bit left in it.

but yeh sorry for the long post but hopefully someone can identify the issue, any help would be greatly appreciated.

cheers

Edited by nisskid
Link to comment
https://www.sau.com.au/forums/topic/152681-clutch-problem/
Share on other sites

Almost sounds like the clutch is not disengaging properly and this is why you are having trouble changing gears and why it rolled forward even though you had your foot on the clutch when you started it..

Doubt it's slipping, more likely not disengaging..

Link to comment
https://www.sau.com.au/forums/topic/152681-clutch-problem/#findComment-2839989
Share on other sites

yep, thats what i couldnt understand, if it was slipping if anything it would probably make it easier to change gears, its more like its engaged partially even when the clutch pedal is completely down. on ns.com i was given a guide to adjust the clutch level in a silvia, that sounds like the way to go but i need to find out how to do it in a R32.

Link to comment
https://www.sau.com.au/forums/topic/152681-clutch-problem/#findComment-2840280
Share on other sites

my ceffy did the same at QR on sunday - starting it in gear with clutch in it started to move forward (if i start it in neutral i cant get any gear) - Stopped in staging, foot on clutch (brand new 2wks old Exedy HD item) car still wanted to roll forward slowly...

Car also bunnyhopped occassionally when clutch was fully out

Link to comment
https://www.sau.com.au/forums/topic/152681-clutch-problem/#findComment-2844499
Share on other sites

check the fluid level in the master cylinder sounds like you have a leak and there is now air in the system which is why the clutch pedal feels different and also why the clutch is hard to use

BINGO! i went to adjust my clutch today and had the thought, how bout i check my fluid level. turns out it was dry as a 90 year old's snatch, also noticed the brake level was below minimum along with steering fluid. I know the steering pump lines are leaking but i checked my fluids a month or less back and it was all fine. might have to keep a close eye out incase there is a leak in the clutch and brake lines.

Link to comment
https://www.sau.com.au/forums/topic/152681-clutch-problem/#findComment-2844811
Share on other sites

easy way to check is master is leaking, is look for stains on the firewall or in the foot well just above the clutch pedal, for the slave just have a look and see if you can see any fluid around it.

the brakes on the other hand i would get checked out, they are not something you want to let go clutch isn't so bad compared to brakes

Edited by Green_s13
Link to comment
https://www.sau.com.au/forums/topic/152681-clutch-problem/#findComment-2850307
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...