Jump to content
SAU Community

200sx S15 Bilstein, Whiteline, Eibach & Noltec Suspension


Recommended Posts

Just a quick question! How come the kit doesn't include a rear strut brace?

Regards,

Albert

Hi Albert, the rear strut braces are pretty inneffectual as the rear upper control arms and traction rods attach to the subframe, not to the chassis. Front strut braces are a good idea as the front upper control arms attach to the chassis, hence a strut brace heps to retain the wheel alignment settings. I have only included items in the kit that I consider necessary.

You can fit a rear strut brace once you have done everything else, but it's not good value for money.

:( cheers :D

  • Replies 148
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I've sorta found some strut tops.. so hopefully i'll be buying the road kit soon... just one quick question though, what is the height like? I mean, i'm assuming it's not adjustable at all, so how will it sit in terms of height compared to a stock suspension with the whiteline springs?

Ride height is around 30 mm lower than standard. You can get another 15 mm with the low profile front strut top. Then use the extra circlip grooves on the rear Bilsteins to lower the rear a similar amount. That's about as low as you want to go for good handling and ride comfort.

:( cheers :D

Hi guys, my inbox is filling up faster than I can respond to the PM’s. I usually get 30 to 40 PM’s a day. With the current delay in delivery, that has increased to 40 to 50 per day and I just can’t keep up with that sort of volume. Particularly as some of the more technical PM’s take 10 to 15 minutes each to reply to and my available time has decreased dramatically for reasons which will become obvious shortly.

I feel that I need to “broadcast” a Group Buy update until I can clear the backlog of PM’s. Here is the current situation;

1. A little back ground first. As you may be aware Redranger and Whiteline merged a couple of months ago. The first step was a merger of Sales, Marketing and Distribution functions and Whiteline’s Minto premises were simply not large enough to accommodate this. So the premises adjacent to Redranger at Somersby were acquired and that was utilised for the larger, merged entity. Some people have taken this as a sign that Redranger “took over” Whiteline, when that is in fact not the case, it is a true merger.

The Whiteline manufacturing premises at Minto remain. More news on that shortly.

2. How this affects the Group Buys. Many of the products that I specified for the Group Buy Kits are unique, it is what makes the kits “work” better than any other Skyline suspension update. This uniqueness has been possible because of my knowledge of the systems within Whiteline (plus Bilstein, of course). The Redranger merger has disrupted that system and the “unique” (to the Group Buy) parts have not been flowing through as they had previously.

3. The good news. I have been working 14 hours a day, every day, for the last week, including yesterday (Saturday) helping to clear that backlog of orders. As a result, all of the Group Buy orders should be delivered this week. At this point I can’t tell you what day your individual order will be delivered. But as they flow through the system I will inform you of the con note numbers as soon as they are issued (the normal system).

In conclusion, I know you probably don’t care about the reasons, you just want your stuff and that is totally understandable. But I felt I had to give some background and let you know that I am working on clearing the backlog (personally as it happens) so that we can return to our previous prompt responses. Please hang off on the PM’s, I promise you that I haven’t skipped off to Brazil with your money. That your stuff will be delivered very shortly.

:) Cheers :(

Thank you Gary~ :)

--

Anyway, I just realised that since I'm going for the eibach/bilstein coilovers, how did the whiteline cause the delay? Which part of this coilover is made from Whiteline parts?

Edited by eron
Thank you Gary~ :)

--

Anyway, I just realised that since I'm going for the eibach/bilstein coilovers, how did the whiteline cause the delay? Which part of this coilover is made from Whiteline parts?

The rear bump stops :) your kit will be shipped Monday (tomorrow), I will let you know the con note number then.

:( cheers :)

so what does this mean to the s13 kit? The prices for it haven't been released either =/ thanks Gary

Delayed a little, I have been too busy to chase up prices from the recalcitrant supplier.

:D cheers :D

  • 2 weeks later...

very interested....

do these come with a warrnty if so how long and whats the procedure?

say when the time comes to get new shocks can our local bilstein supplier refit new shocks at the right valve rates or do we need to send it back to u etc?

finally is there sitll a bottle neck with whiteline or has that all been sorted out?

-Peak

Guest
This topic is now closed to further replies.



  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...