Jump to content
SAU Community

Recommended Posts

Most of the SAU-Vic gear comes from here:

http://www.bluegum.com.au/

Im sure they could work something out. Its not as cheap as ebay, but the quality is always there which is more important.

People pay for good items, people hate paying for shit ones :pwned:

Most of the SAU-Vic gear comes from here:

http://www.bluegum.com.au/

Im sure they could work something out. Its not as cheap as ebay, but the quality is always there which is more important.

People pay for good items, people hate paying for shit ones :pwned:

hey ash, did the sau jackets come from there also?

Yeah dude.

Mine has a slight stiching problem that my grandma will fix in under 5mins :pwned: ... but meh. Its the only one i've heard of with issues.

Rest of the bluegum gear/SAU stuff over the years has lasted very well

Yeah dude.

Mine has a slight stiching problem that my grandma will fix in under 5mins :pwned: ... but meh. Its the only one i've heard of with issues.

Rest of the bluegum gear/SAU stuff over the years has lasted very well

my jacket has issues, i might contact them now i know where its all from :O cheers ash

Hey guys im looking for some 2 tone garage button up shirts.

I have searched ebay and yahoo but no luck :(

If anyone has some contact details could they please forward them to me?

Need to purchase them within the next week or 2.

Thanks :):)

How about this?

HOMY1611.jpg

Link SEXY RACING DRESS

Once you've bought it, post a pic up :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...