Jump to content
SAU Community

Recommended Posts

hi guys just found this cool site so joined up.anyway moving from nz to brisbane soon,i would love to bring my skyline with me but im at a bit of a dead end,i,ll give you abit of info on the car what i,ve got is a 1996 gts coupe(twin airbag model)93000kms owned by me for 2years now and 1 perviuos jap owner was a factory 2ltr single cam ,but it has been converted to a 2.5ltr turbo engine with gtst brakes and hubs etc has tein hr adjustables(sits very low and hard),apexi exhaust hks front mount 17x9inch rims 255/40 tyres,just spent up on it rebuilt engine with oversized forged pistons hi flowed the turbo hd clutch blitz digital boost controller z32 airflow meter bla bla bla.have made inquires on the dotars site they dont seem to know much they say ring a raws shop ring them they say bring the car wont know till they see it..so is this true,i understand i cant bring the car in untill i move then im classed as a aus resudent then i can ship the car over after i apply for import appoval,im ok with that..but to get it complianced i,ve been told the wheels have to come off to wide,suspension has to come out..as it has to come in as in factory specs,so this is the thing it was a factory 2ltr does the engine have to come out,or am i reading it all wrong????is it true i have to put new tyres on too??i just spent $1000 on them.. :happy: ...how much is the compliance cost then i guess i,ll need a mod plate for the engine???if its aloud..also on my chasisis rails at the front of car its been pushed up abit in the centres looks like trolly jacks have been used at some stage is this a problem???is it true you get 2years to get it complianced then you have to ship it out or cut it up?? :yes: looks like areal hassel they make things so hard there,i bought in a rx2 from aus to nz 4years ago all i had to do was put it on a boat a week after landing it was complianced and on the road..no red tape at all you just deal with a one stop shop here,would be great if some one in the know there could help out as if i cant bring this i,ll be driving an old holden :) ...

post-34932-1169959955.jpg

post-34932-1169960174.jpg

Edited by mr rb25 r33
Link to comment
https://www.sau.com.au/forums/topic/153702-impoting-my-gts-from-nz-questions/
Share on other sites

hi guys just found this cool site so joined up.anyway moving from nz to brisbane soon,i would love to bring my skyline with me but im at a bit of a dead end,i,ll give you abit of info on the car what i,ve got is a 1996 gts coupe(twin airbag model)93000kms owned by me for 2years now and 1 perviuos jap owner was a factory 2ltr single cam ,but it has been converted to a 2.5ltr turbo engine with gtst brakes and hubs etc has tein hr adjustables(sits very low and hard),apexi exhaust hks front mount 17x9inch rims 255/40 tyres,just spent up on it rebuilt engine with oversized forged pistons hi flowed the turbo hd clutch blitz digital boost controller z32 airflow meter bla bla bla.have made inquires on the dotars site they dont seem to know much they say ring a raws shop ring them they say bring the car wont know till they see it..so is this true,i understand i cant bring the car in untill i move then im classed as a aus resudent then i can ship the car over after i apply for import appoval,im ok with that..but to get it complianced i,ve been told the wheels have to come off to wide,suspension has to come out..as it has to come in as in factory specs,so this is the thing it was a factory 2ltr does the engine have to come out,or am i reading it all wrong????is it true i have to put new tyres on too??i just spent $1000 on them.. :( ...how much is the compliance cost then i guess i,ll need a mod plate for the engine???if its aloud..also on my chasisis rails at the front of car its been pushed up abit in the centres looks like trolly jacks have been used at some stage is this a problem???is it true you get 2years to get it complianced then you have to ship it out or cut it up?? :) looks like areal hassel they make things so hard there,i bought in a rx2 from aus to nz 4years ago all i had to do was put it on a boat a week after landing it was complianced and on the road..no red tape at all you just deal with a one stop shop here,would be great if some one in the know there could help out as if i cant bring this i,ll be driving an old holden :miner: ...

It sounds like people are leading you up the garden path or at least not making it easy for you to understand your options. You should be able to import this car under the 'personal import' laws which is totally different to the SEVS compliance scheme, so you will not need to meet the SEVS compliance requirements however the car will need to be legal in Brisbane.

Please feel free to call me directly on 0400 502 250 (+61400502250 from NZ) and I will be happy to go through things in more detail for you if necessary.

hey just had a good look through your web site,strict rules aye,dam i will be needing more new tyres again(just got some).mite be just easyer to buy a car from you,when you say car price around $12000 how much normally is it over by??what are the basic requirements for the personal import rules that the car has to pass??it will still need to be complianced though aye???and i guess as it hasnt got the orginal cc rating it,ll need a mod plate??cheers for the help mate...

hey just had a good look through your web site,strict rules aye,dam i will be needing more new tyres again(just got some).mite be just easyer to buy a car from you,when you say car price around $12000 how much normally is it over by??what are the basic requirements for the personal import rules that the car has to pass??it will still need to be complianced though aye???and i guess as it hasnt got the orginal cc rating it,ll need a mod plate??cheers for the help mate...

We usually over allow a little on our estimated prices so there is a good chance that it will be slightly under budget unless there are any unforseen costs along the way, in any case it will usually be within a few hundred dollars either way.

Please call us regarding your specific car, the information noted on our website is mainly for 'SEVS compliance' laws which effect most people - you case would be different as you should be able to import under the 'personal import' laws which I would like to explain to you in more detail.

The personal import laws are a LOT more relaxed so you will not need to return the car to totally standard or replace tyres if they are in good condition already.

he jspec , why not reply to some of your emails for cars on your website rather than reply to posts on this site not even directed to you ?

not ragging on you are anything but I gave up using your company cause I couldnt even get a respone out of you

the funny thing is the cars i enquired in december and got no response about are still on your list now

Edited by arkon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...