Jump to content
SAU Community

Recommended Posts

how much would you sell the manual tailshaft for?, its the same on a series 2 96 r33 right?.. was there a heavey duty clutch on this car?, i would not mind the little annoying things that you upgrade when you get a heavey duty clutch, clamps and all..

hey mate, after the following

drivers side door handle

charcoal canister from the engine bay

"skyline" kick panels from inside the doors if you get me and the small trim from the boot that covers where the boot latches down...

need these parts to complete my 33 for rego next week much appreciatted on a faast reply

location is canberra cheers

AFM $80

GearBox SOLD

Turbo Brake and Hubs SOLD

Pair of Black Elec Mirrors $200

S1 Grill with sliver badge Sold

Radiator SOLD

Dash Cluster SOLD

ECU and loom (LOOM SOLD) still have ECU $150

S1 inner bar modded but still in good condition $100

S1 Front seats Mint Condition $200

S1 Back seats Mint condition apart from slight sun fading to the top $100

Black Front Guards $150 each

Black doors mint condition $175 each with power windows still in them

S1 door cards good condition $75 each

Shocks with King Springs 200

400R Front bar ( Cracked easy to fix) $250

I Have a few other parts laying around send PM if your after anything I will let you know if I have it

in Sydney West

Offers welcome people

Pics Added

Shockies.jpg

Frontseats.jpg

Doorcard.jpg

Cooler.jpg

Bitsandpices.jpg

Edited by ILOWNU

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...