Jump to content
SAU Community

Recommended Posts

what is generally considered the ideal turbo for a rb20det and what kinda hp will it flow?

I you've got 10 g to spend I've either save my money - sell it and buy a gtr. OR rb30 conversion - if you've got the mechanical knowledge the 10g will go a long way towards 300+rwkw and extreme torque.

Cheers

AS ABOVE....

Or if you want to keep your car and engine and have a streetable car as mentioned speak to slide on this forum or contact GCG about getting a highflow.

Value for money they are awesome being able to keep standard manifold/dump pipe etc. You could get 220-240 rwkw out of an rb20 with right supporting mods/tune etc.

Hope that helps

Also try the rb20 thread to look at how others have gone about modding theirs and their results.

Cheers,

Ryan

ten G is a fair wack of coin my friend! you have some great options as mentioned. Get a 32 GTR would be my pick, or if you want to stick with your car, use the money to put an RB26 in there and almost have a GTR.

Best advice from myself who has seen a lot of money lost from upgrading mods i already upgraded, then got bored of: dont waste your money on the rb20 or even a 25, go an RB26 and you'll have a platform that can lazily be a 160rwkw daily to a 300+rwkw street weapon or sleeper.

Ive spent a small fortune making my rb25 pretty sweet (which in all fairness it is), but im ready to throw an rb26 in there after much time and money spent.

cheers, enjoy your spending!

ten G is a fair wack of coin my friend! you have some great options as mentioned. Get a 32 GTR would be my pick, or if you want to stick with your car, use the money to put an RB26 in there and almost have a GTR.

Best advice from myself who has seen a lot of money lost from upgrading mods i already upgraded, then got bored of: dont waste your money on the rb20 or even a 25, go an RB26 and you'll have a platform that can lazily be a 160rwkw daily to a 300+rwkw street weapon or sleeper.

Ive spent a small fortune making my rb25 pretty sweet (which in all fairness it is), but im ready to throw an rb26 in there after much time and money spent.

cheers, enjoy your spending!

Thanks for the advice mate

To go the route of an engine swap to a rb26 would 10k cover all the cost?....buying the engine, having it install with the microtech etc (i dont want to stuff around with standard comp), would the gts4 gearbox be able to stand up to the extra strain of a 26 or would i need a gtr box? More $$$

Like you say you dont want to be revisting things you have already modified and spend $$$ on because your not happy, thats why im on here, want to get in right the first time

Thank again for your help

Thanks for the advice mate

To go the route of an engine swap to a rb26 would 10k cover all the cost?....buying the engine, having it install with the microtech etc (i dont want to stuff around with standard comp), would the gts4 gearbox be able to stand up to the extra strain of a 26 or would i need a gtr box? More $$$

Like you say you dont want to be revisting things you have already modified and spend $$$ on because your not happy, thats why im on here, want to get in right the first time

Thank again for your help

couldnt tell you about the strengths of a gts4 box.. im sure someone will jump in and tell you if its the same as a gtr one anyway.

It depends on which way you wanna go, if you can find a 26 that you know is healthy and can just drop it in, i would think 10g would cover everything. But if you want to add some new turbos, injectors and start modding the 26 then you may be looking at more. even some decent second hand upgrade turbo's could fit your bill. Theres a fairly recent thread i started, asking cost of putting a 26 into my gts-t.

edit: http://www.skylinesaustralia.com/forums/in...152866&st=0

check out R31Nismoids posts, esp #5 to give you some pricing ideas...

But personally i think selling and finding a nice 32GTR would be best idea as at the very least youll have better brakes, seats, and not to mention a legend parked in your driveway!!

Edited by SLY33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...