Jump to content
SAU Community

Recommended Posts

looking for fog lights to fit these holes pictured below.. any help would be good.. not necessarily after two.. just one would do.. would prefer to have the tacky looking yellow plastic look..

cheers, tushar

post-40010-1190510234_thumb.jpg

  • 1 year later...

Any chance you have a inside drivers-side headlight for an 1987 Nissan Skyline,R31? The headlight is the square one that fits between the main rectangular headlight and the grill.

Thanks

Neil

I have a whole lot of Nissan lights I'm selling. If what your looking for isn't listed here I still may have it. Because of the amount of lights I've got if your interested could you pm me, with a good description or a Nissan part number or a pic of what you want. I can also send you back pictures showing the condition of my lights. BTW I'm located across the ditch in New Zealand... Shipping isn't to bad to Australia . On average its about $25 to $30 for a set tail lights and a little bit more for big headlights.

Skyline:

* I have one set of DR30 / HR30 Tail lights ( The late Japaneses ones) Apparently they go for between $400 and $700 a set ( http://www.skylinesaustralia.com/forums/lo...hp/t57858.html) Is that a reasonable figure to be asking for them?)

* Also a couple of sets the hot plate style r30 tail lights.

* The late r30 square type tail lights

* R31 square type tail lights

* R31 late (striped kind)

* A DR30 headlight

* HR30 Headlights

* One R31 Headlight (bug eye kind)

* Several sets of the normal square r31 headlights

* R31 side indicators

* Tail lights off a PC211

* R32 Left headlights

* R32 GTS / GTR Tail lights

* R32 4 door tail lights

* R33 4 door tail lights ( Only left side)

Sorry If any of the codes are incorrect they have been copied from the lights. Which were written on by people dismantling the cars.

I also have lights: Side lights, Head lights, indicators, bumper lights, fog lights, rear lights, tail lights. For the following models Nissan:

180 SX

200 SX

Silvia S13 (all years and models)

Silvia S12, and S11?Laurel

Cefiro ( A31 )

Maxima (J30)

Bluebird ( U11, U12, U13, SSS and )

Pulsar ( N12, N13, N14, Exa, Langley etc)

Gloria

Cedric ( Y30 aka 300C), Y31, Y32 )

March ( Micra) ( K10, K11)

280ZX

300ZX (Z30, Z31, Z32)

Sentra ( B11, B12, B13, B14 )

Stanza

Sunny ( B310, B11, B12, B13, B14)

Older Models:

Datsun 1200, 1600

140 / 160 J sedan

Skyline PC211

Bluebird B910

Silvia S110, S12

Laurel C31 (1981)

Old Pulsar (N10, N12 (exa), N13)

Bluebird (910 and U11, plus some older I think)

260C

100A ( Datsun Cherry?)

Sunny Coupe (1400 RWD)

180 - 200B (N910) (Bluebird 610??)

B310 Coupe

Sunny Sedan RWD

Sunny 120Y RWD

B310 Sunny Stationwagon

Cheers

Matthew

(Sorry about the long post)

  • 2 months later...

Do you still have the headlights for sale mate? chasing front headlights for my r30, also interested in any upgrades prehaps dr30 fronts?

Thanks John - [email protected]

Hey mate...how much for a set of headlights for a R33 series 1...smoked or clear, but would prefer clear. Posted to 4152 aswell.

Cheers

Brendan

  • 2 weeks later...
  • 3 weeks later...
  • 4 months later...
I have a whole lot of Nissan lights I'm selling. If what your looking for isn't listed here I still may have it. Because of the amount of lights I've got if your interested could you pm me, with a good description or a Nissan part number or a pic of what you want. I can also send you back pictures showing the condition of my lights. BTW I'm located across the ditch in New Zealand... Shipping isn't to bad to Australia . On average its about $25 to $30 for a set tail lights and a little bit more for big headlights.

Skyline:

* I have one set of DR30 / HR30 Tail lights ( The late Japaneses ones) Apparently they go for between $400 and $700 a set ( http://www.skylinesaustralia.com/forums/lo...hp/t57858.html) Is that a reasonable figure to be asking for them?)

* Also a couple of sets the hot plate style r30 tail lights.

* The late r30 square type tail lights

* R31 square type tail lights

* R31 late (striped kind)

* A DR30 headlight

* HR30 Headlights

* One R31 Headlight (bug eye kind)

* Several sets of the normal square r31 headlights

* R31 side indicators

* Tail lights off a PC211

* R32 Left headlights

* R32 GTS / GTR Tail lights

* R32 4 door tail lights

* R33 4 door tail lights ( Only left side)

Sorry If any of the codes are incorrect they have been copied from the lights. Which were written on by people dismantling the cars.

I also have lights: Side lights, Head lights, indicators, bumper lights, fog lights, rear lights, tail lights. For the following models Nissan:

180 SX

200 SX

Silvia S13 (all years and models)

Silvia S12, and S11?Laurel

Cefiro ( A31 )

Maxima (J30)

Bluebird ( U11, U12, U13, SSS and )

Pulsar ( N12, N13, N14, Exa, Langley etc)

Gloria

Cedric ( Y30 aka 300C), Y31, Y32 )

March ( Micra) ( K10, K11)

280ZX

300ZX (Z30, Z31, Z32)

Sentra ( B11, B12, B13, B14 )

Stanza

Sunny ( B310, B11, B12, B13, B14)

Older Models:

Datsun 1200, 1600

140 / 160 J sedan

Skyline PC211

Bluebird B910

Silvia S110, S12

Laurel C31 (1981)

Old Pulsar (N10, N12 (exa), N13)

Bluebird (910 and U11, plus some older I think)

260C

100A ( Datsun Cherry?)

Sunny Coupe (1400 RWD)

180 - 200B (N910) (Bluebird 610??)

B310 Coupe

Sunny Sedan RWD

Sunny 120Y RWD

B310 Sunny Stationwagon

Cheers

Matthew

(Sorry about the long post)

hey are you still selling lights cause im in desperate need of a pair of datsun 200B rear tail lights mine are faded and cracked and they dont work so please let me know.

thanks

jason

post-67132-1254634851_thumb.jpg

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...