Jump to content
SAU Community

Recommended Posts

Give us the part number of the pistons, rod length and bore.

I will work out the approx comp ratio.

I am 99% sure you will not have a 8.2-8.3:1 comp ratio.

The only pistons Wiseco sell off the shelf that have a dish are the RB30DET pistons. They give a 7:1 comp ratio. All the others have a 14cc dome.

Obviously you will have a little more comp ratio if you have a zero deck height.

BUT that will depend on the rods and how much you can deck the block if it is indeed possible to get the zero deck clearance you are after when combined with the compression height of your pistons.

Tell me the specs on the rods.. Are the EXACTLY the same size as the rb30 ones?

I'd be interested too.

DnB the rods look identical to the ones I have, SCAT modified chev rods.

The SCAT rod looks to be approx 1mm longer than the stocker.

Mine require a thicker rod bearing which needs to be chamfered to fit. I havent had it fitted/measured yet.

check this link. i have a thread on it over on our rb friends site calaisturbo

http://www.calaisturbo.com.au/showthread.php?t=30077

did you measure that with the standard chev little end bush? its bigger than the nissan one so it would measure longer if you went overall measurements rather than centres

did you measure that with the standard chev little end bush? its bigger than the nissan one so it would measure longer if you went overall measurements rather than centres

NO, the rods had bushes fitted to handle 1000hp plus for an rb30 when I bought them.

I bought the rods through a mates contacts, he works at Gold Coast Porsche.

I put the scat rod against the stock rod and compared it by eye.

Just a couple of quick questions,

Does the RB25DET oil cooler bolt straight to the RB30 block, or is it different somehow, maybe the filter bypass valve is different or something?

I haven't removed it yet for actual inspection myself, but im sure someone would know?

oilcooler.jpg

Also what is this extra drain for, i assume oil? Should i extend the line and plumb it into the sump?

Because I have seen a few conversions where this line has just been crimped shut, therfore no drain, is it critical.

Once again I havent removed it yet for actual inspection.

extradrain.jpg

Cheers for any help :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...