Jump to content
SAU Community

Weird Question.. Chinese/asian/jap Shops In Vic? Where?


Recommended Posts

hello!

I've been looking everywhere in the city for an asian shop that sells chinese dresses and men's shirts etc.. in Sydney (where I grew up), there is a huge asian shop near central that has just about everything oriental you could ever need.. but down here I can't find anything! I even went to Vic Market but couldn't find anything there either (didn't help they were all packing up tho). Can someone point me in the right direction?

There's a very cool, expensive Hello Kitty shop in the city x2 but other than that I've only seen food supermarkets etc.

Northside or city is better.

I also can't find any Japanese shops that sell decorations, home stuff etc.. big fans, wall hangings and the like. Is there anywhere in Vic like that?

Also the closest Jap supermarket is in St Kilda even though we live northside.. if there is one closer please let me know! Too far to go for Dashi sauce.. might as well get takeaway..

I know where everything is in Sydney (helps that I grew up with a chinese stepmother).. but even after 6 years down here I'm still clueless (and I don't know where any shops are either!) :laugh:

Any help would be appreciated.. :)

Cheers!

Kaz

I wouldn't bother with Springvale as mentioned by a couple of people..... unless you're after asian groceries.

Some places that might be able to help you with stuff are:

http://www.shoji-tatami.com.au/

Asian Bazaar Imports

146 Ashley St Maidstone

any Ishka store

There are also a bunch of places that sell imported asian furniture and decor, but I only know of ones over in the south/south east.

In High st Northcote/Clifton Hill just before it goes wide at the bottom of the hill with the good city views.

There is a shop that sells imported asian furniture and sells cool kimono's and asian fabrics.

It might have some other traditional clothing?

There's one of Toorak rd half way between Chapel st, and Sth yarra train station.

And i've been told of one Burke rd, near the junction thats suppost to be good.

I'm trying to find Imported Asahi!! :laugh:

Have you tried Chinatown in the city?!? That would probably have everything you're looking for..... :P

well you'd think so.. but when I said I can only find supermarkets and mentioned the city, I meant chinatown basically.. there's a hello kitty/nightmare b4 xmas etc shop there.. but they have like maybe 3 dresses at a ridiculous price and that's it. :laugh:

There's one of Toorak rd half way between Chapel st, and Sth yarra train station.

And i've been told of one Burke rd, near the junction thats suppost to be good.

I'm trying to find Imported Asahi!! :laugh:

Imported Asahi.. do u mean as opposed to locally brewed Asahi??

Michael used to work for Fosters and we were under the impression it was imported but maybe they brew it locally.. ?

Either way we get our Asahi from Liquorland or ColesOnline and Dan Murphy is a good place for rare drinks.. :P

Australian Asahi is brewed and imported from Thailand. The JDM Asahi taste's better, and i've been told the odd Japanese food importer sometimes has the odd slab or two thrown in the container when importing their main stock.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...