Jump to content
SAU Community

Recommended Posts

"if you're gonna complain about shit - maybe try not to get EVERYTHING for less than terry's cost price " huddy

"well im not sponsored so i dont automatically get that - must haggle " Adz

no one gets cost or below cost I dont, Huddy doesnt and no one should

how the hell would the shop stay open if it

did so you must not haggle over every little thing

normally it will just piss us off especially if u are trying to get it at what you think is cost

maybe I'll try asking optus for a item/service for half price and see how far that gets me

I treat people how I would want to be treat when Im shopping seeing as Ive worked in alot of retail shops before I know what its like on the other side of the counter

Haggle to much and Terry's likely to through you out

or drag the item home tied behind his car rather than sell it to you

lol

anyway Adz spend the $14 so you know for sure Marky didnt even drive your car how pissed are you gonna be if you swap them over and the noise is still there

Edited by 1400r
  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

thankyou for your mediation to the conversation ryan

im worried pedders will f**k the car up...

if the hubs arent it - i can return them to my mate and then he still owes me more money so... i try - if it doesnt work waste of time... if it works - cheering s14 hubs for 150 :P

and im sure i can sell these ones i have and someone would have resources to locate bearings and put them in and they will have some sweet hubs

"im worried pedders will f**k the car up... "

dude dont get them to fix it just get them them to diagnose the problem

for $14 it must take them all of 20min to do the full inspection

on a hoist just stand around watching them while there doing it

or not up to you :(

well it would be a driving thing... and i dont want some pedders dickcheese to go smashing my front bar or ripping my sump off... ill DRIVE them but thats as close as they get (im thingy like a chick)

and goodluck to my car getting on a pedders hoist... im just gonna change them over tomorrow

n go from there!

if it still fkd ill then goto pedders upon your advisement

thankyou for all your help ryan *huggles*

Edited by Hella Flush

well im doing the swap on thursday... and i completely forgot that s14 front hubs/wheelbearings are one piece... so means i have to swap the whole damn thing over

so whomever would like some front 5 stud - you can have stubaxles/hubs from s14 with 1 shot wheelbearing (still drives fine - just noisey above 60kph) $480 delivered aus wide just replace the bearing and add your brake setup and youre rockin 5 stud

just fitted up drivers side front

used lower control arm the whole bit

getting some s14 bolts and Terry's gonna redrill the s13 coilovers out a couple of mill to suit

had to adjust the caster rods a fair bit though to get them to line up again

yippee

grabs popcorn - sits on couch.........*I LIKE ICE CREAM HOOOOO!!! HARD GAY*

ads not being a C***, but i really think you need to look into what kind of things Huddy does infact get and not assume he gets free gear. and yes nissan are ripoffs.........HARD GAY styles, GENUINE NISSAN RIP OFF HOOOOOOOOOOOOOO!!!!!!!!...........okay (thrusting pelvis on all directions)

neither is joo mang... :iluvff:

hey, tires next week same with engine mount and then A>I>R

also may organise some biatches for the photo, and some camera and the video for the recording of the attempted sliding

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...