Jump to content
SAU Community

Day Out With Kutsie, Take 2 (updated With Pics)


Recommended Posts

So it was time to get a new tune with kutsie.

Changes since the old setup, was a new cold air intake, a new ecu from Central 20, and a gizzmo EBC.

So I will put the scans up tomorrow.

First up Andrew ran the car with the setup as was, and running rich it pulled a good 180 rwKw or so. But as we began to take fuel out of the car with the SAFC II, pinging set in. So Andrew knocked back the timing and decreased the base fuel pressure, and the pinging went away. He proceeded to do so a few times and set up the boost controller for 4 different settings, and the cruise lambda settings as well.

SO what was the outcome? HERE WE GO, 192 rwKw @ 9.3 psi, 195 @ 10.2psi, 199 @ 11.9 psi AND 207 rwKw @ 12.3 psi. I have actually seen the EBC jump to 14.2 psi while driving and I don’t know what power that was, but in first gear I got nothing but smoke out the tires.

YEEEEEEEEEEEEEEHHHHHHHHHHHHAAAAAAAAAAAAAAAAA 200 rwKw target achieved, thus stage one is complete.

Once again thanks must go out to Andrew and the team at Pro Automotive, I can't state enough how professional the guys there are. Many thanks.

So now onto stage two. New intake plenum in planning progress, new turbo, new injectors and a new ecu, not sure which, but will actually try what it will do with the current Central 20 ecu and a new turbo.

For a relatively stock car, with all the mods being done by myself, I am chuffed. Not only did I reach my target, but I due to the new ECU I picked up close to 60 rwKw through the whole rev range.

EDITED: It would pay if i read the dyno properly.

Edited by WogsRus

glad to see you got there eventually :laugh:

that's more power than mine had! bastard!

Well it'll still be a couple months before mine is turboed, but I'd like to see my figures within 15-20rwkw of that from the dirty old RB30

hell yeah, befor it was so slow through the mid range, and then bag, gear change. Allthough because it seams like there is less pull, because it is more linear, IT IS SOOOO much faster then before.

Thanks Toff, much appriciated. The car is great, and loving it.

Hay have you got a box soughted yet?

:no: he hasn't and is still looking for one ASAP :laugh:

You should of gone into Joe's on Tuesday they had the release of the 07 R1.

Not a bad bus by the looks of it but i've got my eye on something else :P

FIX THAT BIKE ALREADY WOULD YA :sorcerer:

YESSSS OH GREAT ONE< I WILL DO AS YOU DESIRE.............

Mate i was already out the door on Tusday, but my wifes sister was up form Sydney with her husband, and they decided to go for dinner, eaven though they knew i had other plans, hence my day was screwed.

Will you be in next tusday?

Hi Young GT-R, got to work early, like me?

YESSSS OH GREAT ONE< I WILL DO AS YOU DESIRE.............

Mate i was already out the door on Tusday, but my wifes sister was up form Sydney with her husband, and they decided to go for dinner, eaven though they knew i had other plans, hence my day was screwed.

Will you be in next tusday?

Hi Young GT-R, got to work early, like me?

:) im glad your learning...

Bloody inlaws hey who needs em :)

You keen for a beer next Tuesday old kid???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...