Jump to content
SAU Community

Recommended Posts

I have a pretty basic question.

I have just bought a couple of Z32 AFM's and a PowerFC to go with my Skyline and I was wandering what I need to do to fit the AFM's to the car. I have the plugs already, I guess I am more interested in finding out what I need to do to physically replace the AFM's?

Any assistance would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/155598-fitting-z32-afms-to-rb26/
Share on other sites

you will need to rewire them as per Paulr33's site

http:\\paulr33.skylinesaustralia.com - digrams section.

then you will need to get pipes made up to convert the std 65mm hose to the new 80mm Z32 AFM's

you will need to rewire them as per Paulr33's site

http:\\paulr33.skylinesaustralia.com - digrams section.

then you will need to get pipes made up to convert the std 65mm hose to the new 80mm Z32 AFM's

You dont need to make new pipes to fit them at all.

I have recently fitted them to my GTR with Tomei AFM plugs.

The new plugs needed to be wired in to replace the factory AFM plugs, and some adapter plates were custom made for me by CRD to allow the Z32 AFM's to bolt on to my existing Apexi pod adapters.

z32AFM/PowerFC combination should give a gain in power and fingers crossed a better power curve. At least these are the reasons I am making the modifications to my GTR.

Thanks everyone for your responses. I am going to see if I can stretch the rubber hoses to fit and get a couple of adapter plates made up.

it will provide you with nothing more than tuning resolution

you should only need z32s if you are seeing the stock afms going to 5v

nothing else to be gained

stretching the houses doesnt sound like a good idea

apexi make a power intake kit to suit rb26 and z32s 80mm kit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...