Jump to content
SAU Community

Recommended Posts

Hi guys I have a page guard alarm system in my car which i had installed shortly after purchasing the car and have not had any problems up untill now. The unit has a lcd (i think) pager remote which takes 1 AAA battery. This morning when i went to open the car, the battery in the pager had gone flat. Problem is i keep some spare batteries in the glove box incase one goes when i'm out somewhere.

So i had to open the car with the key - which made the alarm go off as expected, now usually i would then just replace the battery and stop the alarm by pushing one of the buttons on the pager - but it would not stop, i tried closing the doors, different batteries, kill switch, everything and the alarm would not disengage. It's like as if the alarm no longer corresponds with the remote / pager. Ususally when you disarm the alarm, the pager says 'disarm' then is shows a pic of a lambo with a moving red arrow to clarify that it has been dis-armed. When you press the button now the remote says 'arm' and has no follow up picture or anything. I ended up having to find the module for the system and dis-connect the main harness to turn it off... I know this sounds a bit technical but i was hoping there could be some alarm guru's out ther who could possibly shed some light on the situation.

Thanks guys

Edited by R33silverS2
Link to comment
https://www.sau.com.au/forums/topic/155616-page-guard-alarm-system/
Share on other sites

good you know where the module is :) go one better and take it out. that is a common problem with them. antenna dies of the unit s lose programming. if you have the instructions and the spare remote - rekey both of them to the unit.

good you know where the module is :) go one better and take it out. that is a common problem with them. antenna dies of the unit s lose programming. if you have the instructions and the spare remote - rekey both of them to the unit.

I have intructuctions but only one remote. If i take the module out is ther anything i can do to try and fix it?

nope not without the other one. you need it to reset the unit.

Thanks for your help - can the unit be reset without too much difficulty? as in will i be able to take it to the guy who installed it and could he most likely fix this problem, or is my alarm totally shagged now?

had one of these on my r33. Shit alarm thats all i can say. Once it was raining heavily outside when i was driving the car, alarm started goin ape shit on the road. woudlnt respond to any buttons i was pushing . IT was like it was ignoring me haha. But anyhow pretty embaressing (people prob thought i was driving a stolen car lol) luckily it wasnt to far from home. A couple of other times in hot weather when i pushed the unlock door button the alarm woudlnt respond. My 2 cents

Oh that sucks, you know you get an alarm with all the bells and whistles and it's just got more sh#t that can go wrong with it. I just want a simple alarm and immobiliser no more of this pager and what not.

Oh that sucks, you know you get an alarm with all the bells and whistles and it's just got more sh#t that can go wrong with it. I just want a simple alarm and immobiliser no more of this pager and what not.

I do such a thing however you are in MLB and I'm not.

what you are REALLY after is a GSM paging unit with a decent alarm. that is the same idea has what you have and the insurance company will like it :happy:

I do such a thing however you are in MLB and I'm not.

what you are REALLY after is a GSM paging unit with a decent alarm. that is the same idea has what you have and the insurance company will like it :huh:

Yeh well i guess i'll start having to look around for what options i have-damn annoying though cos i thought i had the alarm stuff over and one with. whats your opinion on vipers?

Yeh well i guess i'll start having to look around for what options i have-damn annoying though cos i thought i had the alarm stuff over and one with. whats your opinion on vipers?

460/480 XV - good. 791 - nope.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...