Jump to content
SAU Community

Recommended Posts

Hey Guys, the time has come to sell my much loved GTR. Now have a young family and i just can't give the car the time she deserves or the money i want to spend on her.

Specs Are---

R32 GTR 1992

Complied 2001

66,xxx k's

Factory Midnight Blue Pearl Paint

HKS GT-RS Turbos

HKS Stainless Dump Pipes

HKS Front Pipes

3 1/2 Inch Exhaust and Hi Flow Cat

HKS Step 1 Cams

Adjustable Cam Gears

Head Reco'd and Ports given a clean up

M's Pod filters

HKS 550cc Injectors

Adjustable Fuel Regulator

600hp In Tank Fuel Pump

Apexi Power FC & Controller

120mm Mick's Metalcraft Intercooler

Jim Berry Custom Cluch & Pressure Plate

Lightened Flywheel

Lowered King Springs

Rays 3 Peice Racing Rims 17x9's

275 Federal Tyres (Near New)

RWD Switch

Turbosmart Bleed Valve

Car has run 10.97 @ 127.4 MPH (May 06)

Has only been run once at WISD (5 runs only)

502.2 hp @ the wheels running 1.2bar

Standard rear wing & bonnet included

Have owned it for 5 years. Car had 48,000k's when purchased, was completly stock when i got it except for a catback exhaust (which has since been changed) Have most receipts, Very, Very good condition inside, outside and mechanically. Car is Gun Barrel Straight. Searched 5 states and 4 months to find this car originally, if your after the RIGHT car, save yourself the legwork...

Sorry NO BLING HERE!!!!!lol

$25,000

Please PM me to arrange a look at the car or for more details.

post-18968-1171020155.jpgpost-18968-1171020190.jpgpost-18968-1171020271.jpg

post-18968-1171020297.jpgpost-18968-1171020322.jpgpost-18968-1171020348.jpg

post-18968-1171020374.jpgpost-18968-1171020389.jpgpost-18968-1171020417.jpg

post-18968-1171020436.jpg post-18968-1171020451.jpg

Edited by SCOOP
Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/
Share on other sites

Guys, i have had heaps to do with this car, including helping to detail her up, and i car tell you it's so bloody clean and straight, you could eat food off the under carraige, let alone off the paint work (by the way Daz doesnt actually eat off the car LOL!!!!) I was also with the car at WISD when it ran it's 10.9 and with the right fuel, more boost and some more tuning this thing has heaps left in it.

That's M2C. I'm going to miss you SCOOP...... :(

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-2895559
Share on other sites

Hi guys,

I'm a mechanic buy trade (and job) and i have driven the car just a week ago for a wedding and its very much alive ! Its a pleasure to drive like ALL GTR's should be.

With just a bleed valve as boost control and a street tune she has more to offer. This car offers the little things like perfect carpet and trims and no rattles etc, the right base for a built up as a even quicker car and also being able to be entered in a show and shine.

Its well worth the look if you want a clean slate !

I to well miss you SCOOP :)

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-2909209
Share on other sites

Hi guys,

I'm a mechanic buy trade (and job) and i have driven the car just a week ago for a wedding and its very much alive ! Its a pleasure to drive like ALL GTR's should be.

With just a bleed valve as boost control and a street tune she has more to offer. This car offers the little things like perfect carpet and trims and no rattles etc, the right base for a built up as a even quicker car and also being able to be entered in a show and shine.

Its well worth the look if you want a clean slate !

I to well miss you SCOOP :huh:

Thanks Mincs, Id say she's gonna be around for a while yet. :P

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-2917210
Share on other sites

  • 3 weeks later...
With all due respect how long do you think a stock bottom end will hold up to 600+ fly wheel HP ???

Who knows! Hours, years. Mate car has been like this for 2 and a half years, I try to drive it once a week to work but at the moment Ive driven it every day for the last month. Im not a hoon (anymore) but she gets a bit once a week, and at the moment every few days she might get a bit frisky.There isnt anywhere were you can stay into it anyway, just a short burst is all I need to get my fix :laugh: . But most times I can cruise to work and back and not rev over 4 grand. Besides if you dont think its gonna last then dont buy it. :D

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-2979218
Share on other sites

  • 5 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

Im back guys, Any decent offers or swaps? I really dont want to go any further with her if I can help it, would need to get it fitted out to race if I want to keep going and its just getting to expensive. Would love MK1 Cortina to build and race but cant find one. Can anyone help? :) And thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-3130079
Share on other sites

see if you like what i have to offer in the link below

I was actually reading the for sales on boostcruising, found yours and read it. then went back on here and you had messaged me, freaky. Sorry but realy want to sell or swap something fairly cheaper + cash adjust, thanks anyway and good luck with your sale. :blink:

Link to comment
https://www.sau.com.au/forums/topic/155651-10-sec-r32-gtr/#findComment-3133178
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...