Jump to content
SAU Community

Recommended Posts

OK pps

I'm still having problems with the thermo fan on my R32 GTR

if I replace the fuse - the fan works fine for a while - and the car sits bang on 80 degrees

After a while (if I get stuck in Brisbane traffic), when the fan comes under a real load - it blows the fuse again.

My auto electrician is suggesting the fan may be shot. Under load it's pulling too much juice (too much resistance in the fan I suspect) and it blows the fuse.

Now - it's sounds like I need a new fan - so which one do I get

The Genuine Nissan item costs $450+ and needs to make it's way from the land of the rising Sun

UAS have one for $260 - but it does not look like it's a direct swap

http://www.nismo.com.au/pricelists/General.../thermofan1.jpg

Talk to me - what is the go-to solution here ?

Link to comment
https://www.sau.com.au/forums/topic/156747-thermo-fan-on-r32-gtr/
Share on other sites

is it blowing the fuse or melting the fuse? Popping the fuse means its a short but it sounds like yours is pulling too much juice and melting it! Maybe try re-wiring it otherwise yeah you might need a new fan i haven't really helped much huh.

Cheers Matt.

is it blowing the fuse or melting the fuse? Popping the fuse means its a short but it sounds like yours is pulling too much juice and melting it! Maybe try re-wiring it otherwise yeah you might need a new fan i haven't really helped much huh.

Cheers Matt.

yep - did the re-wire thing last week end

still playing up all week

yep - did the re-wire thing last week end

still playing up all week

I'd suggest an aftermarket Davies Craig. A 14" will set you back about $170 from memory. Just make sure you buy it from an car A/C mechanic not a parts store (eg. Autobahn) otherwise you will fork out probably twice that.

Cheers

Did the Thermo fan come with the car or was it replaced? sounds like it has a too hire current flow, or as some have suggested the wiring is shot. Is the fan run through a relay?

looks std to me - only about 10 inches tho

does not run via relay (that I can see)

I've check wiring at it looks OK (to me anyway)

will see if I can get an after market fan installed this week and let everyone know if this fixes the problem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...