Jump to content
SAU Community

Recommended Posts

Can any one help us? Looking to find out the below in relation to the Stagea:

1. What is the maximum vehicle towing capacity?

2. What is the maximum tow ball weight?

Very interested in considering a Stagea, how ever we have struggled to find out any information relating to their towing capacity.......

Cheers :(

Link to comment
https://www.sau.com.au/forums/topic/157769-stagea-towing-info/
Share on other sites

They don't come with tow bars, you need to get custom ones made. I guess it depends on what the tow bar engineer says.

http://www.skylinesaustralia.com/forums/in...showtopic=49484

there has been numerous threads on this already. Search is your friend.

I don't know the answer to either question.

But I do know I'm towing over 2tonne regularly (gtr and trailer) without any problems. Rear is too low but thats because I haven't put new shocks and firmer springs in yet (Sydneykid's group buy).

It does a great job

I'm towing over 2tonne regularly (gtr and trailer) without any problems.

Oooo - just hope to god you never prang it. Good luck getting an insurance company to ever pay up. How's the breakaway system set up on the trailer, just out of interest?

well...the best answer I can give to that is that the GVM on the rego papers is 1900kg. 2000kg is an estimate based on the trailer tare 500kg and gtr 1500kg :happy: It has full electric brakes but no breakaway system

Like Duncan I tow the race car with our Stagea, ours is a little lighter being an R32GTST weighing 1200 kgs with a similar 500 kg trailer with electric brakes. I also carry around 200 kgs of tools and spares. Two up, with that sort of load, the Stagea itself weighs ~2 tonnes, so towing 1,700 kgs is a breeze. Much better than the ED Foulcan waggon we used before the Stagea.

Legal....I have no idea, the numbers say that it is

I pass Police cars regularly and have never had any questions asked

Safe....as safe as any other 3.7 tonne projectile

Feels a whole lot safer than the Foulcan and the Toyota HiLux that preceeded it

Insurance.... is OK

The Stagea, the trailer and the race car are all insured through Shannons

So they know about the whole package.

:happy: cheers :kiss:

Yeh, wasn't trying to be smart (although I admit did come across that way). just that one you go over 2 tonnes, the rules change. You must have brakes on all 4 trailer wheels, and a breakaway system fitted (according to federal legislation).

Most people don't know (or care) about this (including cops) until you try to make a claim and then the insurance comapny will drop you like a hot potato.

Pretty sad really, considering many hire trailers can weigh up to 800+kg. doesn't leave much room for a car

I tow my rally car with a Forester XT (manufacturer rated at 1800kg) and it never feels happy about it. Power is not a problem - I can overtake comfortably - even uphill, just the whole combo moves the Forrie around a bit much for my liking.

As far as towing capacity goes, I'm pretty sure that the laws state that the car's towing capacity is the greater of its TARE weight, or manufacturer's official rating. In the absence of a rating (does the Stagea have one) you're limited to towing the same weight as an unladen Stagea. that may vary state to state though.

Yeh, wasn't trying to be smart (although I admit did come across that way). just that one you go over 2 tonnes, the rules change. You must have brakes on all 4 trailer wheels, and a breakaway system fitted (according to federal legislation).

Most people don't know (or care) about this (including cops) until you try to make a claim and then the insurance comapny will drop you like a hot potato.

Pretty sad really, considering many hire trailers can weigh up to 800+kg. doesn't leave much room for a car

I tow my rally car with a Forester XT (manufacturer rated at 1800kg) and it never feels happy about it. Power is not a problem - I can overtake comfortably - even uphill, just the whole combo moves the Forrie around a bit much for my liking.

As far as towing capacity goes, I'm pretty sure that the laws state that the car's towing capacity is the greater of its TARE weight, or manufacturer's official rating. In the absence of a rating (does the Stagea have one) you're limited to towing the same weight as an unladen Stagea. that may vary state to state though.

A Forrester GT weighs about 200 kgs less than a Stagea. Plus it is a front wheel drive waggon that drives a little bit at the rear, ocassionally. The Stagea is a rear wheel drive waggon that drives occasionally at the front. Big difference, that's why we get almost no "pushing" from the trailer.

I have no concerns with insurance, Shannons know the weights of all three (Stagea, R32GTST and trailer).

The NSW regulations are;

1. All trailers with a Gross Trailer Mass (GTM) exceeding 750kg and first registered after 30 June 1990

are required to be fitted with an efficient braking system. For trailers with a GTM of up to 2 tonnes,

this braking system can be either an overrun system or one that is operated from the driver's seat.

2. For trailers with a GTM exceeding 2 tonnes, the braking system must be capable of being applied from

the driver’s seat - overrun brakes are not acceptable. In addition, the braking system must be such

that if the trailer accidentally breaks away (from the towing vehicle), the trailer brakes will apply

automatically and remain applied for at least 15 minutes.

3. It should be noted that the brakes must operate on ALL WHEELS (exceptions are trailers not over 2

tonnes Aggregate Trailer Mass (ATM) and trailers manufactured prior to ADR 38/--. Their service

brakes must operate on all wheels on at least one axle).

(ATM = the weight of the trailer, its load and the draw bar load)

(GTM = the weight of the trailer and its load)

ie; the only difference is GTM doesn't include the draw bar weight.

Since my ATM is not over 2 tonnes, rule #2 does not apply to me.

This is an Australian Design Rule (ADR #38) so it SHOULD apply everywhere in Australia. But some states are notorious for ignoring ADR's, so best to check with your local Authority.

:wave: cheers :)

A Forrester GT weighs about 200 kgs less than a Stagea. Plus it is a front wheel drive waggon that drives a little bit at the rear, ocassionally. The Stagea is a rear wheel drive waggon that drives occasionally at the front. Big difference, that's why we get almost no "pushing" from the trailer.

Well, firstly, the XT is full time AWD, not a Front driver driving the rear wheels on occasion. Far better for towing than any other setup - even the Nissan ATESSA system. Secondly, nothing wrong with front drive vehicles for towing (WRT stability). Some traction problems and long term structural integrity issues can be a concern, but one of the best tow vehicles I've used was a TH Magna. i wouldn't believe it either if I hadn't experienced it myself.

my criticism of the Forester is as much the blame of the trailer (very short drawbar, and some gemetry issues in the axle design) as the Forester itself. I've never towed another heavy trailer with the Forry, nor have I towed the car trailer behind another vehicle, so can't comment for sure. The self levelling rear suspension also makes it hard to gauge the weight on the towball, which as you'd know has a huge effect on the towing stability. I'm still fine tuning that aspect of it.

Looking again at the ADR's, my interpretation is that the ATM is the total mass of the trailer, ie unhitch it on a weighbridge and it's the total weight of the combo. The GTM is the load that the trailer exerts on the ground, ie the total mass less the towball vertical load (often about 100-200kg). In that case, a 600kg trailer with a 1500kg car on it still qualifies as GTM under 2 tonnes, if the drawbar load is 150kg (about what it should be)

Anyone comment on this?

Well, firstly, the XT is full time AWD, not a Front driver driving the rear wheels on occasion. Far better for towing than any other setup - even the Nissan ATESSA system. Secondly, nothing wrong with front drive vehicles for towing (WRT stability). Some traction problems and long term structural integrity issues can be a concern, but one of the best tow vehicles I've used was a TH Magna. i wouldn't believe it either if I hadn't experienced it myself.

my criticism of the Forester is as much the blame of the trailer (very short drawbar, and some gemetry issues in the axle design) as the Forester itself. I've never towed another heavy trailer with the Forry, nor have I towed the car trailer behind another vehicle, so can't comment for sure. The self levelling rear suspension also makes it hard to gauge the weight on the towball, which as you'd know has a huge effect on the towing stability. I'm still fine tuning that aspect of it.

Looking again at the ADR's, my interpretation is that the ATM is the total mass of the trailer, ie unhitch it on a weighbridge and it's the total weight of the combo. The GTM is the load that the trailer exerts on the ground, ie the total mass less the towball vertical load (often about 100-200kg). In that case, a 600kg trailer with a 1500kg car on it still qualifies as GTM under 2 tonnes, if the drawbar load is 150kg (about what it should be)

Anyone comment on this?

The Forrester has a centre differential, the engine drives the front wheels ALL THE TIME, hence the rear wheels can NEVER have more than 50% of the drive. The Stagea has no centre differential, the engine drives the rear wheels ALL THE TIME. They can (and do) receive more than 50% of the drive, MOST of the time. Hence, BIG difference.

I have also towed a race car with a Magna, albeit under 1500 kgs all up, and it was fine. Except taking off from a standstill in the rain, that was tricky. Plus I got it bogged in the pits more than once when it thunder stormed late in the day. Did the same with the Foulcan, so that's not too much of black mark.

For determining draw bar weight, try a set of scales under the jocky wheel set at the towing height, it gives a pretty good indication.

You got it, with ATM versus GTM, the draw bar weight is the difference. If it has a GTM under 2 tonnes then you don't need break away brakes. But if the ATM is over 2 tonnes, then the brakes have to work on all wheels.

So in your example (ATM 2100 kgs, GTM 1950 KGS) the way I read it, the trailer would need brakes on all wheels, but no break away braking system. And those brakes would not need to "be capable of being applied from the driver’s seat". eg; 4 wheel overrun brakes would be OK.

:rofl: cheers :)

Yet when the going gets slippery, the Subaru system is far better than the Nissan system because it delivers torque to the wheel as soon as any slip ocurs, not when the compueter decides that a predetermined set of parameters has been met. I've personally experienced this on track days where the GTR's kept falling off the track backwards (along with every other 2WD car out there) and the Subys just kept going round and round.

If there's no slip, then it doesn't matter a toss what wheels are driving. I'm just saying that the Subaru system copes with loss of traction better than the artificial environment created by the Nissan system

I know we can argue the merits of each all day, and I gather we'll never agree on the matter, so I'm more than happy to agree to disagree. Besides, in this case the biggest factor affecting stability for towing is the weight of the towing vehicle, which is where the Stag has a 150-ish kg advantage.

I'm hopefully picking up a new tdi pathfinder very soon, so the Forry will become the family taxi and the Pathfinder will be my toy.

Interesting about your comments on the Falcon tow car. I had an XG (EL) XR6 ute before the Magna, which I thought was OK until I tried the Magna. The Ute used to get bogged in the grass behind my house as well. I think only a 4Wd would have gotten me out of that one though.

Probably not for usage on a race track or normal driving situations at all, the Stagea has a little button on the dash that can be pressed to give 50/50 split front/rear, driving away on wet slippery grass with no fuss at all.

Yet when the going gets slippery, the Subaru system is far better than the Nissan system because it delivers torque to the wheel as soon as any slip ocurs, not when the compueter decides that a predetermined set of parameters has been met. I've personally experienced this on track days where the GTR's kept falling off the track backwards (along with every other 2WD car out there) and the Subys just kept going round and round.

If there's no slip, then it doesn't matter a toss what wheels are driving. I'm just saying that the Subaru system copes with loss of traction better than the artificial environment created by the Nissan system

I know we can argue the merits of each all day, and I gather we'll never agree on the matter, so I'm more than happy to agree to disagree. Besides, in this case the biggest factor affecting stability for towing is the weight of the towing vehicle, which is where the Stag has a 150-ish kg advantage.

I'm hopefully picking up a new tdi pathfinder very soon, so the Forry will become the family taxi and the Pathfinder will be my toy.

Interesting about your comments on the Falcon tow car. I had an XG (EL) XR6 ute before the Magna, which I thought was OK until I tried the Magna. The Ute used to get bogged in the grass behind my house as well. I think only a 4Wd would have gotten me out of that one though.

The non spinning in the wet is not due to the 4wd system, it is due to front wheel drive first bias :rofl:

The worst tow car I ever had was an SS manual ute, 1st was too high and the lack of weight over the rear wheels was a dissaster, then I was always worried about stuff being stolen out of the back. I moved it on very quickly.

:) cheers :sick:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...