Jump to content
SAU Community

Recommended Posts

Hey guys.

Ive just got some 18x8 and 18x9 wheels for my R32gtst.

the offset front and back is 38..

the backs fit on perfectly...

but the fronts hit the calliper.

So i went down to autobarn and bought a pair of 8mm spacers...

and the wheel turns but still rubs against where it says nissan on the calliper..

I called around a few places looking for some 10mm bolt on spacers. but seemingly they are non existant. the smallest i could get were 20mm. which is too big..

what do i do? it only just (as in only JUST! :( i would need about 0.5mm more clearence to be ok).. rubs against where it says nissan on the calliper. could i file the nissan off the calliper?

Cheers guys.

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/
Share on other sites

Plenty of people have shaved "Nissan" off the calipers for clearance but personally if it's that close I would not feel comfortable, especially with "slip on" spacers. Slip ons are dodgey at best and dangerous at worst. They reduce the stud length available for the wheel nuts and are usually not "hub centric".

You've obviously purchased wheels that are low/medium caliper clearance, 4 pot Nissans need high caliper clearance wheels to fit without spacers. Maybe somebody with a Gtst could help with offset variables

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2931466
Share on other sites

I filed the nissan off the calliper.. that and used 8mm slip on (non centering) spacers..

Seems ok for now... Down the track (soon) i will purchase some longer studs...

might even fork out for some centering spacers.. but for now it all seems fine.

Cheers for the help.

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2931941
Share on other sites

Hey guys.

Ive just got some 18x8 and 18x9 wheels for my R32gtst.

the offset front and back is 38..

the backs fit on perfectly...

but the fronts hit the calliper.

So i went down to autobarn and bought a pair of 8mm spacers...

and the wheel turns but still rubs against where it says nissan on the calliper..

I called around a few places looking for some 10mm bolt on spacers. but seemingly they are non existant. the smallest i could get were 20mm. which is too big..

what do i do? it only just (as in only JUST! :laugh: i would need about 0.5mm more clearence to be ok).. rubs against where it says nissan on the calliper. could i file the nissan off the calliper?

Cheers guys.

I had some 10mm ones made up, perfect fit as they were made to suit. Cost $80 a pair or so.

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2932595
Share on other sites

10mm bolt ons? on slip ons?

i wouldnt want to go any bigger than what i have if they were slip on..

are there disadvantages in running a spacer that is bigger than required.

the fact that an 8mm spacer fits makes me not want to go any bigger...

where abotus did you get them made up.. not that it really matters considering your in brisbane..

anyone know of anywhere that could make some up in melbourne?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2934017
Share on other sites

10mm bolt ons? on slip ons?

i wouldnt want to go any bigger than what i have if they were slip on..

are there disadvantages in running a spacer that is bigger than required.

the fact that an 8mm spacer fits makes me not want to go any bigger...

where abotus did you get them made up.. not that it really matters considering your in brisbane..

anyone know of anywhere that could make some up in melbourne?

Cheers

10mm slip on. The smallest you can get in bolt on is 15mm or so I could find anyway.

Mine are a tight fit... As in wire brush to clean it all up, then a slight tap with a rubber mallet to get them on (hubs were still a bit warm tho) They are hub centrivical (sp?). So they tightly fit the hub, then my wheels fit the spacers hub, if that makes sense. And I have longer studs.

[edit] go to http://www.skylinesaustralia.com/forums/in...t&p=2432648 linky linky. Thats some pic of my old ones, and my new ones to give you an idea on what Im talking about.

Edited by dangerous_daveo
Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2936334
Share on other sites

Yeh. they look nice.

the ones i have at the moment have slots rather than holes for the stud to go through. so once they are on they move around a fair bit...

did my best to center them before tightning the wheel..

Ill have to look into getting some longer studs and a self centering spacer for mine...

although either way its still illegal i believe.

Link to comment
https://www.sau.com.au/forums/topic/157797-what-to-do/#findComment-2940310
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...