Jump to content
SAU Community

Recommended Posts

I would like to improve the feel of my steering and would like some opinions on what are the best upgrades.

Currently I only have minor suspension mods. whiteline springs, shcoks and swaybars. all my bushes are factory and are in reasonable condition. there are no bumps, shakes or rattles. the steering just feels a spongy and not as responsive as it could. there is very little play and the rack in in good condition.

What are good ugrades to do to increase the response of the steering. and where can I get them from..

I was thinking steering spacer made of alluminium insted of the rubber one, new steering rack mounts.

what other bushes will improve the feel

I am a complete novice when it comes to steering and suspension. I know engines gearboxes and diffs but have never had anything to do with steering.

Thanks!

alloy steering bush will make a big difference in feel

also seen replacement rack mounting rubber bushes made from alloy or nolthane probably worth getting

adjustable castor rods are also a good idea for one of the first mods you should do

I had been thinking about castor rods. but have been told by 2 workshops and SK that spherical bearings are not a good idea.

can someone recommend any? also where to buy steering spacer?

Get the Whiteline castor bushes from the groupbuy, or they make an adjustable rod aswell, with bushes, not spherical bearings.

Steering spacer can be bought off a guy on here, NV_N01, $30 if I remember right, but PM him and get the proper price.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...