Jump to content
SAU Community

Recommended Posts

Hey all,

I have a 97 R33 GTSt Coupe and recently had the front lip plastic welded up and resprayed due to the fact that is was f**ed when i got it (Cost me $400). Driving out of a driveway in a heavy rain storm, it tapped on the curb and disentegrated. Car is STD ride height and I'm not an idiot (most of the time).

I have looked around but haven't had much luck finding a company who can supply a well made good quality front bar or lip in Sydney. What do you guys use on your S2 GTST coupes? I dont want some piece of crap 3rd hand copy bar hanging off my car... Where can I go to get some quality?

Link to comment
https://www.sau.com.au/forums/topic/158931-s2-r33-gtst-coupe-front-bar/
Share on other sites

hey chris i have the actual same problem and i am after a front lip for my 97 gtst as well.

so i will be interested in wat people ave to say as well. you posted up before i did on the sae topic.haha.

i am more nsw victoria border though,

Hi Cliff, I paid $400 for a plastic welder to weld it all up, but on light impact, it fell apart along the original cracks. It was a waste of money I would say. I am considering going a new front bar completely at the monent, but I want to get something that is half decent and wont fall apart. I am trying to work out whether I should get a new front bar, or just the lip.

Can people with S2 R33 gtst's post up what they have done in this situation?

Please help as I am getting sick of driving around a car that is constantly broken visually.

Edited by Chris_R33GTSt
Hi Cliff, I paid $400 for a plastic welder to weld it all up, but on light impact, it fell apart along the original cracks. It was a waste of money I would say. I am considering going a new front bar completely at the monent, but I want to get something that is half decent and wont fall apart. I am trying to work out whether I should get a new front bar, or just the lip.

Can people with S2 R33 gtst's post up what they have done in this situation?

Please help as I am getting sick of driving around a car that is constantly broken visually.

yeh i am the same i have been tossing up between a new front bar or front lip as well. cause i really like the look of the front lip but i dunno if i wanna spend my money on that or if i should just go all out and replace the whole front bar

I believe at some point in time, my car kissed a gutter in Japan, and was very poorly repaired. EG; Skiaflex was used to *Glue* the pieces of front lip back on to the bar and then resprayed. I had it plastic welded back together, but even plastic welding didn't give it the strength that I was looking for, so I have now wasted $400 that I could have put to a more practical use.

My Type M Lip is now so f**d that It could never be repaired. As I see it: Option 1: is to buy a new lip from Nissan (Expensive but gaurenteed result) or Option 2: Find the best fibreglass bar I can find and chance it with that.

Where can I find some good body kit parts from in Sydney?

I believe at some point in time, my car kissed a gutter in Japan, and was very poorly repaired. EG; Skiaflex was used to *Glue* the pieces of front lip back on to the bar and then resprayed. I had it plastic welded back together, but even plastic welding didn't give it the strength that I was looking for, so I have now wasted $400 that I could have put to a more practical use.

My Type M Lip is now so f**d that It could never be repaired. As I see it: Option 1: is to buy a new lip from Nissan (Expensive but gaurenteed result) or Option 2: Find the best fibreglass bar I can find and chance it with that.

Where can I find some good body kit parts from in Sydney?

These guys are in Aus and sell areplica front lip. I have asked where in Aus you guys can buy as this buy/sell site is NZ based. Hopefully he answers!

http://www.trademe.co.nz/Browse/Listing.as...amp;permanent=0

I bought a whole bumper to obtain a lip. On arrial I saw it was pretty beat up with half arsed repair. I have since patched it up with fibreglass and had it attached fnished and pinted to the bumper. Time will tell how well the repair was done, but I'm confident it will hold. If any one decides to repair with fibreglass, don't reinforce with too many layers at once as when he resin/glass heats up and cures it can warp.

Hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...