Jump to content
SAU Community

Which Coilovers Would You Get For Under $2000?  

48 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Just want to see what everyones preferences are on choosing coilovers, for a budget say $2000.

Car is R34 Gtt, 260rwkw, 80% street use and 20% circuit.

HKS Hypermax II. Height and damp adjustable, from Nengun $2000 EMS delivered.

Sydneykid Bilstein & Whiteline Suspension $2200 for the full kit, you get a lot more than just coilovers but delivery is subject stock.

TEIN - Super Street. Height and damp adjustable, from Nengun $1500 EMS delivered.

Flying Performance TEIN SKYLINE COILOVER SUSPENSION $1899 + $40 P&H (not sure of specs)

Nismo - S Tune - Suspension Kit. Hardness adjustable. $1770 EMS delivered Nengun.

Just Jap G4 Racing Street Spec Coilovers, Spring rate: 13 (F) 8.7 ® Kg/mm 36 way damper & height adjustable. $1299 pickup in Sydney.

Thanks.

Edited by Forged
Link to comment
https://www.sau.com.au/forums/topic/159105-r34-coilovers-choice/
Share on other sites

Definitely Whiteline/Bilstein groupbuy.

As you said it's not just coilovers and it's everything working together in a suspension system that makes it great, not one single component

Why aren't Commodores fast when you put coilovers in them?

Edited by salad

I went with Tein type flex from nengun and adj. whiteline swaybars, sydneykids kit is suposed to work really well but i wanted my car to go lower than the springs that he uses. i like my setup but could be a bit stiff for some ppl

Ive heard the S tune nismos are one of the best around.. Soft yet really good on track.. Ill be buying SS from nengun.. seems to be one of the cheaper alternatives and everyone has reported excellent handling and dampening

I've got the TEIN Type Flex in mine along with a few other bits of suspension goodness... makes the car solid like a rock (feel every ripple on the road) but that's the way I like it.

Handles like it's on rails as well.

The only downside is that your passengers will soon get rather annoyed with the ride quality as they cannot possible pre-empt each time the car "bumps"

oh. and forget the G4s. 13Kg front and 8.7kg rear is INSANE. especially with twin tube dampers that will have no hope in hell of controlling a spring that heavy. I run 10kg front and 8kg rear in a GTR and even with top of the line ohlins with remote gas canisters and seperate bump and rebound adjustment (600 settings per shock) they are still too hard for street or track.

Greddy TYPE S is an obvious omision from that list. Engineered and developed for street and track by Takeshi Tsuchiya GT500 and GT300 fame.

ER34 run 8kg front 6kg rear $1999 retail (aimed as a competitor for TEIN RA (one step above FLEX) for specs)

monotube 46mm pistons variable rate springs etc etc

http://www.trust-power.com/06sus_spring/pe...nce_dumper.html

Edited by URAS
Greddy TYPE S is an obvious omision from that list. Engineered and developed for street and track by Takeshi Tsuchiya GT500 and GT300 fame.

ER34 run 8kg front 6kg rear $1999 retail (aimed as a competitor for TEIN RA (one step above FLEX) for specs)

monotube 46mm pistons variable rate springs etc etc

http://www.trust-power.com/06sus_spring/pe...nce_dumper.html

Looks interesting.

I see from the Tein site that they have replaced the RA model with the "Mono Flex" which spec wise looks similar to the GReddy unit above.

Would be interested to hear some feedback on both of these products.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...