Jump to content
SAU Community

Recommended Posts

Want to get stainless steel intercooler piping on my r32. Got a FMIC.

I got it out of a kit I found that the piping suplied just did not fit up right at all, So i modified and found that the pipies are not all .round

So fed up want to get it done properly.

Anyone know any reasonably priced places that will fabricate it up,

and how much will aprox cost.

Thanx.

Link to comment
https://www.sau.com.au/forums/topic/159127-where-to-get-fmic-piping/
Share on other sites

Hey dude... they usually charge by the hr for welding.. i know my workshop charge like $88 or sumfin per hr cos its "welding" and its more hazardous or sumfin... not too sure... but a good fabricator can knock sumfin like that off in a couple of hrs... then you have your bends and striaght s/s pipes which are like $15-$20 per bend depending where you get it from, your best bet is to go to a workshop that does it and ask for full price... btw s/s looks HEAPS better than the shit alloy pipe they give you in kits.. just a bit more $ lol

yeah but the allulminum pipes are lighter.. wher as SS aint. and the weakest link is still elbow joints and or silicone hoses. so dnt need SS. mild steel is fine too if u like the rust look.

call up ECC they can do it.

also which FMIC kit did u use..?

yeah but the allulminum pipes are lighter.. wher as SS aint. and the weakest link is still elbow joints and or silicone hoses. so dnt need SS. mild steel is fine too if u like the rust look.

call up ECC they can do it.

also which FMIC kit did u use..?

Like 1kg lighter?

Does it make a difference? like really?

Try Xtreme Automotive

(07) 3290 0107

they specialise in custom piping/fabrication

mate took me down there for my supra at the time...intercooler was damaged aswell

they fixed and welded up cooler, chrome stainless steel 2.5 piping, the whole works...$700

otherwise, do it urself kits are available from autobarn for most skylines...however, price wise it will prolly cost the same :laugh:

Want to get stainless steel intercooler piping on my r32. Got a FMIC.

I got it out of a kit I found that the piping suplied just did not fit up right at all, So i modified and found that the pipies are not all .round

So fed up want to get it done properly.

Anyone know any reasonably priced places that will fabricate it up,

and how much will aprox cost.

Thanx.

I can highly recommend Steve from Motion Garage. Tig welding is excellent and nice shiny finish if it means anything to you. Steve specialises in intercooler kits, custom exhaust manifolds and full stainless exhaust systems. I think I have some photos of his work in my gallery.

Ph.0407672023

Cheers,

Ben

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...